HP rp2450 Manual do Utilizador descarregar pdf (Página 5)

3.0 Documentation Compliance

The product successfully meets the compliance criteria for the Documentation

Requirements as defined by Hewlett Packard. Specific installation instructions

were available, specifying when user intervention is required for installation to an

appropriately configured and localized HP-UX platform(s).

Comments and Observations:

The commands given to rebuild the kernel are not HP standard. The kernel

should be rebuilt in the ‘/stand/build’ directory with the kmupdate command

issued after kernel build is completed. This will insure recoverability in case of

invalid or corrupt kernel. Also, the shutdown command should be used instead of

the reboot command. The shutdown command requires the system to execute

system shutdown scripts and is therefore much ‘cleaner’. Usage of the shutdown

command precludes the need to issue the ‘sync’ command.

In issuing the ‘swinstall –s `pwd`/lpfc.depot –x autoreboot=true LPFC command

(Chapter 3, instruction 3.2), you are not given the choice to modify the kernel as

indicated in the next instruction.

4.0 PCI Slot Testing

The product successfully meets the compliance criteria for PCI Slot Testing as defined by

Hewlett Packard. Testing was performed with the product in each I/O slot type supported

by the HP-UX system. HP-UX slot types used were shared, turbo and twin turbo.

IOSCAN and LSDEV were used to verify that the card was recognized by the HP-UX

system.

Comments and Observations:

No comments or issues to report.

5.0 Driver Installation and un-Installation Testing

The product successfully meets the compliance criteria for Installation and

removal as defined by Hewlett Packard. The product must install properly,

uninstall completely, and reinstall properly. The product should also correctly

handle an install attempt if the product is already installed by installing properly

or aborting with notification.

Comments and Observations:

No comments or issues.

6.0 HP-UX Command Functionality Testing

The product successfully meets the compliance criteria for HP-UX Functionality

as defined by Hewlett Packard. These tests validate that the HP-UX system

Imation Storage Networking Lab

1 Imation Place, Oakdale, MN 55128

1 2 3 4 5 6 7 8

Sem comentários

HP rp2450 Manual do Utilizador Página 5