HP rp2450 Manual do Utilizador Página 6

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 8
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 5
recognizes the card properly and that the product is installed and functioning.
Standard HP commands to prepare disks for use, create file systems and use those
file systems were issued against all devices.
Comments and Observations:
Testing was performed with the product in each I/O slot type supported by the
HP-UX system. HP-UX slot types used were shared, turbo and twin turbo.
Standard HP disk and raid devices were used in conducting these tests.
One caveat is that the device does not support booting the operating system and is
not recognized by the system prior to operating system initialization therefore you
can not load the operating system via this device.
7.0 Stress Testing
The product successfully meets the compliance criteria for Stress testing as
defined by Hewlett Packard. Tests include running for an extended period of time
while under load provided by test tools. The product must meet standard
performance expectations for the product type and must not fail or cause conflict
with other software or the operating system during these tests.
Comments and Observations:
Stress and load testing was performed using a tool supplied by HP. The tool
performed a series of tests that exercised the capabilities of the HBA over an
extended period of time. Test Logs, System Logs and CPU utilization were
monitored during this test run.
8.0 HBA Recovery Testing
The product successfully meets the compliance criteria for HBA Recovery testing
as defined by Hewlett Packard. These tests are performed on loop devices only
with an I/O generating program running against the disk device. Tests include:
Cable Disconnect
o Disconnect cable for 10 seconds.
Abrupt power loss of a disk device
o Test recoverability of driver in a disk device power loss scenario.
Target Hot Swap
o Test whether or not device maintains loop ID when ports
connections are changed live.
Imation Storage Networking Lab
1 Imation Place, Oakdale, MN 55128
Vista de página 5
1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários