HP Workstation x4000 Guia de Instalação descarregar pdf (Página 20)

Mass Storage Device Guide Rails

Extra guide rails are attached to the side of the Workstation chassis for

additional mass storage device installations. Depending on the device to

be installed, dedicated guide rails are required and are easily recognized

by their distinct size and color.

The following table indicates the device, location, and required rails.

Device to be

Installed

Location Required

Rails

Installing the Rails

5.25-inch device

(CD-ROM, etc.)

5.25-inch

front access

cage shelf

Wide black

rails

Thereisnospecificsideto

which these guides must be

installed. However, they

must be inserted in the two

holes located at the bottom

of the drive.

3.5-inch device

(floppy, zip drive,

etc.)

Narrow

green left

and right

rails

Carefully breakoff themetal

plate from the chassis.

Insert the guide rail labeled

“L” on the left-hand side

(cable connectors facing

towards you and positioned

at the top), and the guide

rail “R” on the right-hand

side of the hard disk drive.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Sem comentários

HP Workstation x4000 Guia de Instalação Página 20