HP xw6000 Guia do Utilizador descarregar pdf (Página 5)

■ Each DIMM within a pair should be identical in technology. For example, you cannot mix a 256 MB

9-device DIMM with a 128MB 18-device DIMM on the same channel.

NOTE: To identify which DIMM technology you are using, compare the memory size and number of

DRAM components on the module. A 128 MB DIMM has 18 DRAM components that fully populate both

sides of the module. A 256MB DIMM has 9 DRAM components; four on one side, five on the other.

■ The first pair of DIMMS should be installed in slots 1 and 2. The DIMM slots are numbered

sequentially. Slot 1 is closest to the CPUs.

■ The second pair of DIMMS, if any, should be installed in slots 3 and 4.

■ DIMMs must be installed correctly. Be sure to match the keyed slot on the DIMM with the tab on the

DIMM socket.

■ For optimal system performance, DIMMs should be installed in identical pairs in the following three

configurations: slot 1 and 2, slot 3 and 4, or all DIMM slots populated in paired format.

■ If you are using a single DIMM configuration, the DIMM should be installed in slot 1 or slot 3.

NOTE: Although a single-DIMM configuration is possible, it does not provide the optimal system

performance that a dual-DIMM (dual-channel) of matching sizes, configuration provides.

■ If you are installing two DIMMs of different sizes, they can only be installed in slot 1 and slot 3

with each DIMM occupying either slot.

NOTE: Although a mixed size dual-DIMM configuration is possible, it does not provide the optimal

system performance that a dual-DIMM (dual-channel) of matching sizes, configuration provides.

■ No other memory configurations are supported. Attempts to install memory in other configurations

will result in unpredictable system performance.

NOTE: The following table provides acceptable pairing configurations but do not cover all module

capacities. However, the same pairing configuration applies regardless of the module type and capacity.

Table 1 - Available Memory Configurations for the xw6000

Channel A Channel B

Module

Total

Slot

XMM1

Slot

XMM3

Slot

XMM2

Slot

XMM4

29-device Empty 9-device Empty

2Empty

18-device Empty 18-device

2 18-device Empty 18-device Empty

2Empty 9-device Empty 9-device

4 18-device

9-device 18-device 9-device

49-device18-device 9-device 18-device

NOTE: Modules must be paired as indicated in this table where slots 1 and 2, and slots 3 and 4

must contain like modules.

1 2 3 4 5 6 7 8 9 10 ... 82 83

Comentários a estes Manuais

Sem comentários

HP xw6000 Guia do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP xw6000