
System Technical Specifications
c04111346 — DA – 14798 Worldwide — Version 8 — April 1, 2015
Includes system board and memory information
MXM graphics assembly is tool-less.
MiniPCIe cards are screw-in.
Tool-less, except for the processor heatsink.
On tool-free internal chassis mechanisms
Color-coordinated Cables
and Connectors
Screw-In for motherboard, Rear IO and Side IO boards.
Over-Temp Warning on
Screen
Restores the computer to its original factory shipping operating system. Orderable with the
workstation, or available from Support.
Dual Function Side Power
Switch
Power on/off
Causes a fail-safe power off when held for 4 seconds
Yes, Kensington Cable Lock (optional): Locks side cover and secures chassis from theft
3mm x 7mm slot at rear of system
Solenoid Lock and Hood
Sensor
No Solenoid Lock
Hood Sensor - The Sensor Kit detects when the access panel has been opened.
Serial, Parallel, USB,
Audio, Network,
Enable/Disable Port
Control
Enables or disables USB, audio, and network ports
Yes, prevents an unauthorized person from booting up the workstation
Yes, prevents an unauthorized person from changing the workstation configuration
3.3V Aux Power LED on
System PCA
NIC LEDs (integrated)
(Green & Amber)
A T-15 Torx or flat blade screwdriver is needed to remove the CPU heatsink before the CPU can be
removed. CPU removal is tool-less
Power Supply Diagnostic
LED
Blue (normal), red (fault)
Side Hard Drive Activity
LED
Present on an Optical Device
System/Emergency ROM
Flash Recovery
Recovers corrupted system BIOS.
Air cooled forced convection
Two 40 mm x 40 mm x 20 mm 4-wire PWM (not serviceable separately from the power supply)
Comentários a estes Manuais