HP LN17ps Manual do Utilizador descarregar pdf (Página 161)

Hard Drive

Appendix C: Installing and Removing Printer Options ❖ C-17

Align the hard drive connector to the

controller connector (J180), and gently lay

the hard drive on top of the four standoffs.

Push down on the drive until all four

corners latch into place.

Replace the controller board, sliding it

along the alignment channels. Then

hand-tighten the thumb screws.

Replace the power and interface cables

and power ON the printer.

If the drive is already formatted, the

Control Panel will display:

Online

Ready

If the drive is unformatted, the Control

Panel will display:

Press ↑ to Init

Press ↓ to Abort

If any other message is displayed, see

Table 6.2 starting on page 6-6.

If you need to format the drive, continue to

Step 8 on page C-18. Otherwise, skip to

Step 9 on page C-18.

kug-appc Page 17 Thursday, March 6, 1997 4:51 PM

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 243 244

Sem comentários

HP LN17ps Manual do Utilizador Página 161