HP C309A Manual do Utilizador Página 173

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 172
NOTE: If the product has an alignment message, you might be able to press the button next to OK to clear
the message and resume faxing.
After you resolve any problems found, the product can begin answering incoming fax calls.
Cause: An error condition was preventing the product from receiving faxes and Backup Fax Reception was
set to Off.
Pages of a fax I received are missing
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the
first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Solution 1: Load paper in the input tray
Solution 2: Check the sending fax machine for problems
Solution 1: Load paper in the input tray
Solution: Make sure you have paper loaded correctly.
If you have Backup Fax Reception enabled, the product might have stored the fax in memory upon reception.
After you have correctly loaded the paper in the input tray, the product automatically begins printing all the
unprinted faxes from memory, in the order they were received. If you do not have Backup Fax Reception
enabled, or if the fax was not stored in memory for some reason (for example, if the product was out of memory),
you will need to contact the sender and ask for the fax to be resent.
For more information, see:
Load media
Cause: The paper was not loaded correctly in the input tray.
If this did not solve the issue, try the next solution.
Solution 2: Check the sending fax machine for problems
Solution: Check with the sender to find out how many pages were sent. The sending fax machine might have
failed to feed each page of the original.
Cause: The sending fax machine was having problems.
Faxes are received but do not print
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the
first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
Solution 1: Clear any paper jams and make sure paper is loaded in the input tray
Solution 2: Check for error messages on the display
Fax troubleshooting 171
Solve a problem
Vista de página 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 243 244

Comentários a estes Manuais

Sem comentários