HP StorageWorks Enterprise File Services WAN Accelerator Guia do Utilizador Página 20

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 104
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 19
20 1 - OVERVIEW OF THE HP EFS WAN ACCELERATOR
To remove the version
configuration from the
HP EFS WAN
Accelerators
1. Connect to the Management Console on each HP EFS WAN Accelerator.
2. Install the v2.1 image in the Setup: Software Upgrade page.
3. Save the current configuration in the Setup: Configuration Manager page.
4. Reboot the HP EFS WAN Accelerator in the Setup: Reboot Appliance page.
5. Connect to the CLI on each of the HP EFS WAN Accelerators you originally
upgraded (that is, HP EFS WAN Accelerator-1, HP EFS WAN Accelerator-2, HP
EFS WAN Accelerator-3, HP EFS WAN Accelerator-4).
6. On HP EFS WAN Accelerator-1, at the system prompt, enter the following set of
commands:
SH1 > enable
SH1 # configure terminal
SH1 (config) # no peer 0.0.0.0
SH1 (config) # no peer <HP EFS WAN Accelerator-2 IP addr>
SH1 (config) # no peer <HP EFS WAN Accelerator-3 IP addr>
SH1 (config) # no peer <HP EFS WAN Accelerator-4 IP addr>
SH1 (config) # write memory
SH1 (config) # restart
7. On HP EFS WAN Accelerator-2, at the system prompt, enter the following set of
commands:
SH2 > enable
SH2 # configure terminal
SH2 (config) # no peer 0.0.0.0
SH2 (config) # no peer <HP EFS WAN Accelerator-1 IP addr>
SH2 (config) # no peer <HP EFS WAN Accelerator-3 IP addr>
SH2 (config) # no peer <HP EFS WAN Accelerator-4 IP addr>
SH2 (config) # write memory
SH2 (config) # restart
8. On HP EFS WAN Accelerator-3, at the system prompt, enter the following set of
commands:
SH3 > enable
SH3 # configure terminal
SH3 (config) # no peer 0.0.0.0
SH3 (config) # no peer <HP EFS WAN Accelerator-1 IP addr>
SH3 (config) # no peer <HP EFS WAN Accelerator-2 IP addr>
SH3 (config) # no peer <HP EFS WAN Accelerator-4 IP addr>
SH3 (config) # write memory
SH3 (config) # restart
9. On HP EFS WAN Accelerator-4, at the system prompt, enter the following set of
commands:
SH4 > enable
SH4 # configure terminal
SH4 (config) # no peer 0.0.0.0
SH4 (config) # no peer <HP EFS WAN Accelerator-1 IP addr>
SH4 (config) # no peer <HP EFS WAN Accelerator-2 IP addr>
SH4 (config) # no peer <HP EFS WAN Accelerator-3 IP addr>
SH4 (config) # write memory
SH4 (config) # restart
Vista de página 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

Comentários a estes Manuais

Sem comentários

DeVilbiss COMPACT P2-11 manuály

Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace






Další produkty a příručky pro Stříkací barva DeVilbiss

Modely Typ Dokumentu
SB-2-001-F Uživatelský manuál   SB-2-259-B JGA-504 CONVENTIONAL SPRAY GUN [en] , 8 stránky
SB-2-001-F Uživatelský manuál   SB-2-362 - Coast Industrial Systems, Inc., 6 stránky
HVLP Gravity Feed Spraygun Uživatelský manuál   BINKS SV100 HVLP GRAVITY FEED SPRAY GUN, 8 stránky
SB-E-2-534 Uživatelský manuál   DEVILBISS COMPACT – Gravity Feed Spraygun, 12 stránky
FAC752-3 Provozní pokyny   DeVilbiss FAC752-3 Operating instructions, 12 stránky
SB-2-546 Uživatelský manuál   parts breakdown, 1 stránky
SB-2-546 Uživatelský manuál   SB-2-199-F, 8 stránky
SB-E-2-534 Uživatelský manuál     CONV-GRAV ENG-FR-GER-534 iss2.pub, 32 stránky
SB-2-001-F Uživatelský manuál   SB-2-246-G JGHV-531 HIGH VOLUME LOW PRESSURE SPRAY, 6 stránky
SB-2-546 Uživatelský manuál   For Waterborne Materials, 34 stránky