HP Server rp8400 Guia de Instalação descarregar pdf (Página 72)

Chapter 5

System Installation

Configuring the Management Processor for use with a Web Console

The Web console is an embedded feature of the management processor (MP). The Web console allows access to

the server via the LAN port on the core I/O card. MP configuration must be done from an ASCII console.

NOTE The MP has a separate LAN port from the system LAN port. It requires a separate LAN drop,

IP address, and networking information from that of the port used by HP-UX.

Before starting this procedure, the following information is required:

• IP address for the MP LAN

• Subnet mask

• Gateway address

• Hostname (this is used when messages are logged or printed)

To configure the LAN port for a Web console, perform the following steps:

Step 1. Type

^b (Control-b) to access the MP LAN interface.

Step 2. At the MP prompt, type

lc to access the LAN configuration command.

Respond to each prompt with the appropriate information.

Figure 5-9 Example lc Command

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 93 94

Sem comentários

HP Server rp8400 Guia de Instalação Página 72