HP VMA-series Memory Arrays Aviso descarregar pdf (Página 2)

Introduction

The VMA SAN Gateway provides additional scale of connectivity and availability for connecting host

servers using industry standard Fibre Channel to VMA-series Memory Arrays. The VMA SAN

Gateway acts as a storage controller that provides FC connectivity. The VMA SAN Gateway requires

a FC SAN switch between the gateway and the connecting servers.

The VMA SAN Gateway is a special purpose HP ProLiant DL380 G7 based storage controller

running a specially built and tuned operating environment, vSHARE OE, used for providing FC SAN

connectivity to one or two connected VMA-series Memory Arrays. VMA-series Memory Arrays are

connected using PCIe direct connect to the VMA SAN Gateway; the FC ports in the gateway act as

storage controller target ports for FC SAN connectivity to host servers. A maximum of two VMA-series

Arrays can be connected to the VMA SAN Gateway.

The HP VMA SAN Gateway is an appliance and can only be ordered with HP Product Number (P/N)

AM465A. The vSHARE OE cannot be ordered standalone and the VMA SAN Gateway cannot be

„built‟ from existing or new hardware.

Features

The VMA SAN Gateway provides the following features:

 FC SAN connectivity of up to two VMA-series Memory Arrays

 Standard four 8Gb FC target ports with option to add four additional ports

 Special purpose vSHARE Operating Environment

 CLI management interface

 Web browser based GUI management interface

 HP iLO 3 Standard functionality and remote management port

 Redundant power supplies

 RAID 1 mirroring of boot/operating environment disk

 LAN and Serial management ports

For additional details on features, setup, commands, etc., see the HP VMA SAN Gateway Installation

and User Guide, document number AM456-9007A Rev 02, available at www.hp.com/go/vma-docs.

Figure 1: VMA SAN Gateway – front view

1 2 3 4 5 6 7 ... 16 17

Sem comentários

HP VMA-series Memory Arrays Aviso Página 2