HP 3PAR Manual do Utilizador descarregar pdf (Página 54)

additional disk space is added, use the Retry option on the warning message to bring the VM

back to the read-write state. If you select the Cancel option, the VM is rebooted.

In the following example, an HP 3PAR StoreServ Storage TPVV volume was created with a warning

limit of 60%, as shown in the showvv -alert command.

When the warning limit is reached, the HP 3PAR StoreServ Storage sends a soft threshold error

asc/q: 0x38/0x7 and ESX continues to write.

InServ debug log:

1 Debug Host error undefined Port 1:5:2 -- SCSI status 0x02 (Check

condition) Host:sqa-dl380g5-14-esx5 (WWN 2101001B32A4BA98) LUN:22 LUN

WWN:50002ac00264011c VV:0 CDB:280000AB082000000800 (Read10) Skey:0x06 (Unit attention)

asc/q:0x38/07 (Thin provisioning soft threshold reached) VVstat:0x00 (TE_PASS

-- Success) after 0.000s (Abort source unknown) toterr:74882, lunerr:2

# showalert

Id: 193

State: New

Message Code: 0x0270001

Time: 2011-07-13 16:12:15 PDT

Severity: Informational

Type: TP VV allocation size warning

Message: Thin provisioned VV nospace1 has reached allocation

warning of 60G (60% of 100G)

When the HP 3PAR StoreServ Storage runs out of disk space, a hard permanent error asc/q:

0x27/0x7 is sent. Use showspace, showvv -r, and showalert to see the warning and space

usage. The ESX responds by stunning the VM.

InServ debug log:

1 Debug Host error undefined Port 1:5:2 -- SCSI status 0x02 (Check

condition) Host:sqa-dl380g5-14-esx5 (WWN 2101001B32A4BA98) LUN:22 LUN

WWN:50002ac00264011c VV:612 CDB:2A00005D6CC800040000 (Write10) Skey:0x07 (Data protect)

asc/q:0x27/07 (Space allocation failed write protect) VVstat:0x41 (VV_ADM_NO_R5

-- No space left on snap data volume) after 0.302s (Abort source unknown)

toterr:74886, lunerr:3

The following figure shows the VM warning displayed on the vSphere with the Retry and Cancel

options.

54 Configuring the Host for a Fibre Channel Connection

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 88 89

Sem comentários

HP 3PAR Manual do Utilizador Página 54