Hp Insight Management Agents Manual do Utilizador descarregar pdf (Página 122)

• HP SmartMemory—Displays whether the DIMM slot is populated with an HP SmartMemory

DIMM.

• Maximum Frequency—Displays memory module maximum frequency in MHz.

• Minimum Voltage—Displays the minimum voltage, in volts, needed for the module to operate.

• Ranks—Displays the number of physical ranks on the module.

• HP DIMM Part No—Displays the part number for HP SmartMemory DIMMs.

• Technology—Displays the technology of Memory Module.

Unknown—Memory Technology can not be determined.◦

◦ Fast Page

◦ EDO

◦ Burst EDO

◦ Synchronous

◦ RDRAM

◦ RDIMM

◦ UDIMM

◦ LRDIMM

Processors

The following information about each processor in the system is available in this window. This

information may vary depending on device type.

• Processor—Lists the type of processor and its speed. For devices, the colored ball indicates

the status of each processor.

• Co-processor—Displays the type and speed of the coprocessor on the device or client PC,

such as 80387 at 33 MHz, or W 3167 at 33 MHz.

• Slot—Lists the number of the slot where the processor is installed. Use this information for

identification purposes.

• Slot 0—Indicates that a CPU or a memory module is connected directly to the system board

and not in an expansion board.

• Socket—Displays the currently selected processor’s socket. Use this information for identification

purposes.

• Cache—Displays the amount of device or client hardware cache available. For example,

Cache L2: 64KB indicates 64 KB of secondary level cache between the processor and system

memory.

• Action—Indicates what action, if any, should be taken for the currently selected processor.

Possible values include No Action Needed and Replace CPU.

• Step—Displays the revision level of the processor.

• Cores—Indicates the number of cores present in this processor

• Threads—Indicates the number of threads present in this processor

• Hyper-Thread—Indicates whether hyper-threading is enabled or disabled. When

Hyper-Threading is enabled, a single processor acts as two logical processors and the OS

views it as two processors.

122 Agent information

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 174 175

Sem comentários

Hp Insight Management Agents Manual do Utilizador Página 122