HP PROCURVE 6600 Manual do Utilizador descarregar pdf (Página 171)

100

101

Interface Access and System Information

Interface Access: Console/Serial Link, Web, and Inbound Telnet

Syntax: telnet <ipv4-addr | ipv6-addr | hostname | switch-num> [oobm]

Initiates an outbound telnet session to another network

device. The destination can be specified as:

• IPv4 address

• IPv6 address

• Hostname

• Stack number of a member switch (1-16) if the

switch is a commander in a stack and stacking is

enabled

For switches that have a separate out-of-band management

port, the oobm parameter specifies that the Telnet traffic will

go out from the out-of-band management interface. If this

parameter is not specified, the Telnet traffic goes out from the

data interface. The oobm parameter is not available on

switches that do not have a separate out-of-band management

port. Refer to Appendix I, “Network Out-of-Band Manage-

ment” in this guide for more information on out-of-band

management.

For example, if the host “Labswitch” is in the domain abc.com, you can enter

the following command and the destination is resolved to “Lab-

switch.abc.com”.

ProCurve(config)# telnet Labswitch

You can also enter the full domain name in the command:

ProCurve(config)# telnet Labswitch.abc.com

You can use the show telnet command to display the resolved IP address.

7-7

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 853 854

Comentários a estes Manuais

Sem comentários

HP PROCURVE 6600 Manual do Utilizador Página 171

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP PROCURVE 6600