HP PROCURVE 6600 Manual do Utilizador descarregar pdf (Página 568)

100

101

File Transfers

Transferring Switch Configurations

Syntax: copy xmodem startup-config < pc | unix >

copy xmodem config < filename > < pc | unix >

Copies a configuration file from a serially connected PC or

UNIX workstation to a designated configuration file on the

switch. For more on multiple configuration files, refer to

“Multiple Configuration Files” on page 6-26

For example, to copy a configuration file from a PC serially connected to the

switch:

1. Execute the following command:

2. After you see the above prompt, press

[Enter].

3. Execute the terminal emulator commands to begin the file transfer.

4. When the download finishes, you must reboot the switch to implement

the newly downloaded software. To do so, use one of the following

commands:

Syntax: boot system flash [ primary | secondary ]

boot system flash [ config < filename >

Switches boot from the designated configuration file. For more

on multiple configuration files, refer to “Multiple

Configuration Files” on page 6-26.

Syntax:

reload

Reboots from the flash image currently in use.

(For more on these commands, refer to “Rebooting the Switch” on page 6-19.)

A-34

1 2 ... 563 564 565 566 567 568 569 570 571 572 573 ... 853 854

Comentários a estes Manuais

Sem comentários

HP PROCURVE 6600 Manual do Utilizador Página 568

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP PROCURVE 6600