HP sa3110 Guia de Início Rápido descarregar pdf (Página 35)

Adding a Tunnel Entry

4-9

Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide

Adding a Tunnel Entry

You must add tunnel information, including the device name,

tunnel name, authentication type, tunnel protocol, and port

number.

If you have a large number of tunnels, use device polling to add

the information to your corporation entry. See “Adding a Device

Entry” earlier in this document for more information.

Steps To add a tunnel entry:

1. In the left-hand side navigation bar, click Tunnels.

The Tunnels window appears.

2. Click Clear.

3. In the Device Name field, select the device name from the

drop-down list.

4. In the Tunnel Name field, enter a descriptive name for the

tunnel.

5. In the Authentication Type drop-down list, select the method

of authentication.

The default is VPNG.

6. Select the Multi-user check box if the tunnel you are creating

is a multiuser tunnel.

The default is a clear check box, indicating a single-user

tunnel.

7. Select the WINS Tunnel check box if the tunnel is WINS

capable.

The default is a selected check box, indicating that the tunnel

is WINS capable.

8. In the Tunnel Type drop-down list, select either SST (Shiva®

Smart Tunneling) or IPSec.

9. In the Protocol field, enter the type of protocol you want to

use to establish a tunnel.

The default protocol is UDP.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 45 46

Sem comentários

HP sa3110 Guia de Início Rápido Página 35