Hp 3000 Enterprise Virtual Array Manual do Utilizador descarregar pdf (Página 184)

EMU Generated Condition Reports

184 Enterprise Virtual Array 3000 User Guide

1.3.en.02 CRITICAL Condition—High Current

This condition report indicates that an element current has reached the high

current CRITICAL threshold. This condition report remains active until the

problem is corrected.

To correct this problem, record all six characters of the condition report, then

contact your HP authorized service representative.

Backplane Conditions

Note: Backplane NVRAM errors usually occur during manufacture. At this time they

are identified and corrected. They rarely occur during normal operation.

The format of a backplane condition report is 8.2.01.ec, where:

■ 8.2. is the backplane element type number

■ 01. is the two-character backplane element number

■ ec is the error code

The only corrective action available for this error is to replace the drive enclosure.

8.2.01.10 NONCRITICAL Condition—Backplane NVRAM Read

An invalid NVRAM read occurred and an automatic recovery process has begun.

This condition report is active for 15 seconds.

If the automatic recovery process does not correct the problem, record all six

characters of the condition report, then contact your HP authorized service

representative.

8.2.01.11 NONCRITICAL Condition—Backplane NVRAM Write Failure

The system is unable to write data to the NVRAM. This problem prevents

communication between elements in the enclosure. This condition report is active

for 15 seconds.

To correct this problem, record all six characters of the condition report, then

contact your HP authorized service representative.

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 243 244

Sem comentários

Hp 3000 Enterprise Virtual Array Manual do Utilizador Página 184