Hp OpenView Storage Management Appliance and Software Manual do Utilizador descarregar pdf (Página 63)

Discovering Devices and Applications

47Storage Management Appliance Software User Guide

SAN Discoveries

The Storage Management Appliance is also connected to the SAN fabric via a

fabric switch. Some devices within the SAN fabric have no SNMP agent or LAN

connection. The Storage Management Appliance uses a SAN discovery to

identify storage elements connected to the local SAN. A SAN discovery identifies

HSG and HSV controllers (or controller pairs) that are connected to the local

Storage Management Appliance.

This special discovery is preset on the Storage Management Appliance and runs

by default during the update. It is called the Local SAN Discovery and is listed on

the Discovery page (Figure 31). This discovery is set to run on demand and must

be run whenever you add controllers to your SAN or change the Storage

Management Appliance name. Table 3 shows the settings for the Local SAN

Discovery should you need to reset it.

If you use Command View EVA to manage HSV storage elements in your

network, you must use the Remote Access feature to create a user name and

password before the element manager can be identified by a SAN discovery. See

“Remote Access” on page 36 for more information about creating such a user

name and password.

Table 3: Local SAN Discovery Settings

IP Address Community String

127.0.0.1 public

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 131 132

Sem comentários

Hp OpenView Storage Management Appliance and Software Manual do Utilizador Página 63