HP TX1 POS Solution 200 Manual do Utilizador descarregar pdf (Página 62)

3. Remove the slot cover (4) by pressing it through the bottom cover.

4. Remove the slot cover.

Reverse this procedure to install the slot cover.

Docking connector cable

Description Spare part number

Docking connector cable (includes double-sided adhesive) 747631-001

Before removing the docking connector cable, follow these steps:

1. Turn o the tablet. If you are unsure whether the tablet is o or in Hibernation, turn the tablet on, and

then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the display assembly (see Display assembly on page 27), and then remove the

following components:

a. NFC antenna (see NFC antenna on page 34)

b. WWAN module (see WWAN module on page 35)

c. Power button board (see Power button board on page 41)

d. Battery (see Battery on page 48)

e. System board (see System board on page 50)

Remove the docking connector cable:

56 Chapter 6 Removal and replacement procedures – tablet

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 80 81

Sem comentários

HP TX1 POS Solution 200 Manual do Utilizador Página 62