
Sprout shuts down unexpectedly
●
The Sprout might be in an exceedingly hot environment. Turn it o and let it cool down.
●
Be sure that the Sprout vents are not blocked and that the internal fan is running. See Getting to know
your Sprout on page 1 for the location of the computer vents.
Display problems
The display is blank
●
Exit Sleep to redisplay the screen image.
◦
Press the power button briey.
◦
Press a key on the keyboard.
◦
Press the space bar.
◦
Press the esc key.
●
Press the power button to turn on Sprout.
Images on the screen are too large or too small, or the images are fuzzy
Adjust the resolution settings.
1. From the Start screen, type control panel, and then select Control Panel.
2. Select Appearance and Personalization.
3. Under Display, select Adjust Screen Resolution.
4. Adjust resolution as necessary, and then click Apply.
Keyboard and mouse problems
●
Be sure that you are using the keyboard or mouse within range of the receiver.
●
Be sure that the mouse is not in Suspend mode, which occurs after 20 minutes of inactivity. Click the left
mouse button to reactivate it.
●
Replace the batteries in the keyboard and mouse.
●
Re-pair the keyboard and mouse to the receiver.
NOTE: The illustrations below may look slightly dierent from your keyboard and mouse.
IMPORTANT: During these steps, place the keyboard and mouse on the same level as the receiver.
To re-pair the keyboard and mouse:
1. Be sure that the mouse is on (1), and then press and hold the Connect button (2) for 5 to 10 seconds. To
conrm the connection, move the mouse and check for a response on the screen.
2. After the mouse connection is established, complete the following steps to re-pair the keyboard.
3. On the keyboard, press and hold the Connect button (3) for 5 to 10 seconds.
Display problems 37
Comentários a estes Manuais