HP Chromebox G2 Manual do Utilizador descarregar pdf (Página 31)

WLAN module

Description Spare part number

Intel Dual Band Wireless-AC 7265 802.11 AC 2×2 WiFi + Bluetooth 4.2 Combo Adapter (non-vPro) 860883-001

CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module

authorized for use in the computer by the governmental agency that regulates wireless devices in your

country or region. If you replace the module and then receive a warning message, remove the module to

restore device functionality, and then contact technical support.

Before removing the WLAN module, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and

then unplugging the AC adapter from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 17).

5. Remove the rear I/O bracket (see Rear I/O bracket on page 20).

6. Remove the bottom shield (see Bottom shield on page 21).

Remove the WLAN module:

1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The

WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.

2. Remove the Phillips M2.0×3.0 screw (2) that secures the WLAN module to the computer.

(The WLAN module tilts up.)

Component replacement procedures 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 50 51

Sem comentários

HP Chromebox G2 Manual do Utilizador Página 31