HP EliteDesk 800 G4 Base Model Small Form Factor PC Manual do Utilizador descarregar pdf (Página 37)

8. To install a new expansion card, hold the card just above the expansion socket on the system board then

move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into

the small slot on the chassis. Press the card straight down into the expansion socket on the system

board (2).

NOTE: When installing an expansion card, press rmly on the card so that the whole connector is

seated properly in the expansion card socket.

9. Rotate the slot cover retention latch back in place to secure the expansion card.

10. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if

needed.

11. Reassemble the computer.

Expansion card 29

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 143 144

Sem comentários

HP EliteDesk 800 G4 Base Model Small Form Factor PC Manual do Utilizador Página 37