HP Stream - 14t-ax000 CTO Manual do Utilizador descarregar pdf (Página 32)

Battery

Description Spare part number

Battery, 3-cell, 41-WHr, 3.615-AHr, Li-ion 844203-855

Battery cable 905566-001

Before removing the battery, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

4. Remove the bottom cover (see Bottom cover on page 23).

Remove the battery:

1. Disconnect the battery cable from the system board (1).

2. Remove the three PM2.0×2.5 screws (2) that secure the battery to the computer.

3. Remove the two PM2.0×6.0 screws (3) that secure the connector to the computer.

4. Lift the battery and the connector from the computer (4).

5. Disconnect the connector from the battery (5).

6. If replacing the battery cable, remove the cable from its routing path in the computer (6).

Reverse this procedure to install the battery.

24 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 68 69

Sem comentários

HP Stream - 14t-ax000 CTO Manual do Utilizador Página 32