Hp HSG Array Controller Manual do Utilizador Página 118

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 248
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 117
Zoning 6-11
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: g-ch6 Zoning Last Saved On: 4/7/99 12:36 PM
Zone member additions and removals.
Zone members can be displayed for all zones or by individual zone or
configuration.
The Telnet commands are based on the three object types:
Alias
Configuration
Zone.
They provide five “same set” commands for each object type:
Create
Delete
Add
Remove
Show.
Zone Management Example
Figure 6-2 shows a single configuration USA_cfg that has three zones defined,
as follows:
The Red and Green zones share six disk drives on a loop.
The Blue and Green zones share one storage array.
The Blue zone has a dedicated storage array.
NOTE: the JBOD with Loop 2 is not in any zone cannot be accessed from any zone where
the configuration is in effect.
The disks are specified by World Wide Name and the hosts are specified by
physical port.
Figure 6-3 is a graphical representation of the configuration with an additional
disk drive loop that none of the zones “see”.
admin> cfgCreate "USA_cfg", "Red_zone; Blue_zone; Green_zone"
admin> zoneCreate "Red_zone", "0,0; loop1"
admin> zoneCreate "Blue_zone", "0,1; array1; 0,2; array2"
admin> zoneCreate "Green_zone", "0,0; loop1; 0,2; array2"
Vista de página 117
1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 247 248

Comentários a estes Manuais

Sem comentários