Hp Integrity BL870c Server-Blade Manual do Utilizador descarregar pdf (Página 36)

Figure 4 Joining a Seismic Rack R2 to Other Seismic Racks Top View

Figure 5 Joining Adjacent Cabinets

Connecting Site Ground

CAUTION: Site power (rails A & B) and site ground cables must be provided by the customer.

The assembly and connection of site power and ground cables should only be done by a certified

electrician.

The seismic rack and seismic rack R2 are suitable for installation as part of a Common Bonding

Network (CBN).

To ensure proper electrical contact when grounding the seismic rack or seismic rack R2:

• Use a ground cable of the same or larger size than the largest DC input power conductors,

using a 40° C correction factor.

• Use a cable constructed of copper, 75° C minimum rated.

• Use only Listed two-hole copper compression-type lugs for the ground connector.

36 Installing the Seismic Rack

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 46 47

Sem comentários

Hp Integrity BL870c Server-Blade Manual do Utilizador Página 36