Hp ProLiant DL360e Gen8 Server Manual do Utilizador descarregar pdf (Página 12)

Component identification 12

administrators is to restart the system. Resetting the system erases any information which could support

problem analysis, but the NMI feature preserves that information by performing a memory dump before a

system reset.

To force the system to invoke the NMI handler and generate a crash dump log, do one of the following:

• Use the iLO Virtual NMI feature.

• Short the NMI header ("System board components" on page 9).

For more information, see the HP website (http://www.hp.com/support/NMI).

Drive numbering

• Four-bay LFF drive model

• Eight-bay SFF drive model

When the two-port SATA cable is installed in the eight-bay drive cage ("Two-port SATA cable option"

on page 32), the server supports the six-drive SATA configuration. In this configuration, drive bays 1

through 6 are populated, while drive bays 7 and 8 contain drive blanks.

Drive LED definitions

Item LED Status Definition

Locate Solid blue The drive is being identified by a host application.

Flashing blue The drive carrier firmware is being updated or requires an update.

Activity ring Rotating green Drive activity

Off No drive activity

Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off Removing the drive does not cause a logical drive to fail.

Drive status Solid green The drive is a member of one or more logical drives.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 113 114

Sem comentários

Hp ProLiant DL360e Gen8 Server Manual do Utilizador Página 12