Hp Multi-Site Traffic Director sa9200 Manual do Utilizador

hp multi-site traffic director server appliance sa9200 user guide

C H A P T E R 1 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide4Notes

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide94username NOTE: Username commands are not valid in configuration f

C H A P T E R 6 System Commands95System CommandsConfig Sys CommandsCommand Descriptionconfig sysChanges the prompt level to the System Config branch.

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide96ntp create NOTE: If you selected Flash load balancing in the Quic

C H A P T E R 6 System Commands97installNOTE: Save your configurations before installing or booting a new image. Up to five (5) images can be instal

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide98config sys secondaryNOTE: The secondary commands do not need to

C H A P T E R 6 System Commands99Config Sys SNMP Commandsconfig sys wizardChanges the prompt level to the config sys wizard branch.infoDisplays infor

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide100sysLocationAllows you to specify a value for the MIB-II variable

C H A P T E R 6 System Commands101trap infoDisplays the trap receiver list of:• Trap ID Address• Trap Communitytrap portSpecifies the trap port numbe

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide102DNS CommandsConfig DNS CommandsCommand Descriptionconfig dns Move

C H A P T E R 6 DNS Commands103statsDisplays the status of this SA9200 and any connected secondary SA9200s.For example: Queries: 0 Queries/Sec:

Theory of OperationsNOTE: HP Traffic Director refers to either an HP Traffic Director Server Appliance, Model SA7200 and SA7220; or HP e-Commerce Dir

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide104statusIf the SA9200 is a primary, Displays the secondary SA9200(s

C H A P T E R 6 DNS Commands105Config DNS Agents CommandsCommand Descriptionconfig dns agentsChanges the prompt to the config dns agents command leve

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide106metricsDisplays metrics information of all configured agents. If

C H A P T E R 6 DNS Commands107rename Changes the agent’s current name to the name specified in the command line. Syntax:config dns agents rename <

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide108metricsDisplays metric information for the specified agent. Synta

C H A P T E R 6 DNS Commands109 intervalConfigures the interval at which metrics are gathered from the specified agent. The default is 30 seconds. Sy

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide110flash-backup-src Configures a backup source address to which quer

C H A P T E R 6 DNS Commands111statsDisplays statistics for all services for the specified agent. Syntax:config dns agents <agentname> services

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide112renameRenames an existing service.Syntax:config dns agents <ag

C H A P T E R 6 DNS Commands113Config DNS ISV Groups CommandweightSets a weight of an agent service. Services with higher weight are favored over ser

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide6Site Balancing“Intelligent” DNSThe SA9200 leverages the DNS archite

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide114create Creates an ISV group name. ISV name is the hostname of any

C H A P T E R 6 DNS Commands115enableEnables the ISV group for all services under it. All ISV groups are enabled by default.disableDisables the speci

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide116flash-backup-src Configures a backup source address to which quer

C H A P T E R 6 DNS Commands117config dns isvgroups <isvname> services <servicename>Changes the prompt to the config dns isvgroups <is

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide118Config DNS Zones CommandsCommand Descriptionconfig dns zonesChang

C H A P T E R 6 DNS Commands119createCreates a zone. Zone names may not exceed 253 characters, (allowing at least one character for a hostname and on

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide120infoDisplays configuration information for the current zone. Synt

C H A P T E R 6 DNS Commands121statsDisplays the statistical information of the specified zone. Syntax: config dns zones <zonename> statswhere:

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide122delete authorityDeletes the specified authority record for the sp

C H A P T E R 6 DNS Commands123infoDisplays all hostnames under the specified zone.Syntax: config dns zones <zonename> hostnames infowhere: zon

C H A P T E R 2 Authoritative DNS Servers7Multi-Site Load BalancingAuthoritative DNS ServersThe DNS maps, or “resolves” hostnames into IP addresses.

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide124create NOTE: When entering the hostname, do not include the zon

C H A P T E R 6 DNS Commands125rename Renames the specified host under the specified zone.Syntax: config dns zones <zonename> hostnames rename

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide126statsDisplays the statistics information for the specified host i

C H A P T E R 6 DNS Commands127ttl Configures the Time to Live (TTL) value, in seconds, for the specified zone/host. TTL is expressed an integer grea

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide128authority If enabled, designates this SA9200 as authoritative for

C H A P T E R 6 DNS Commands129map Maps the combination of an agent and a service or an ISV name and service with the specified hostname.siteservicen

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide130Config DNS Flash CommandsCommand Descriptionconfig dns flashChang

C H A P T E R 6 DNS Commands131aliasingEnables or disables IP aliasing. The show dns flash info command displays whether aliasing is enabled or disab

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide132Show Commands Command Descriptionshow dnsChanges the prompt to th

C H A P T E R 6 Show Commands133stats allDisplays the DNS Statistics (see stats command for definitions), and all SA9200 information for all configur

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide84. The client DNS server sends a query to the mstd-ex.com Authorita

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide134infoDisplays information for all configured agents. Information d

C H A P T E R 6 Show Commands135metrics <ip address> port <port #>Displays metrics for the specified unconfigured agent. If specified age

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide136infoDisplays information about the specified agent.Information di

C H A P T E R 6 Show Commands137metricsDisplays metrics information for a single specified agent. Syntax: show dns agents <agentname> metricsIn

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide138metrics <ip address> port <port#>Displays metrics for

C H A P T E R 6 Show Commands139show dns agents <agentname> services <servicename>Changes the prompt to the show dns agents <agentname

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide140statsDisplays all statistical information within the specified IS

C H A P T E R 6 Show Commands141statsDisplays the statistics on all zones committed under this SA9200. Zone names are displayed followed by the numbe

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide142show dns zones <zonename> hostnames Changes the prompt to t

C H A P T E R 6 Show Commands143infoDisplays committed hostname, the load balancing method, the TTL, the authority of the specified host, and any sit

C H A P T E R 2 Multi-Site Traffic Management Without HP Traffic Directors9Multi-Site Traffic Management Without HP Traffic Directors The SA9200 can

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide144statsDisplays the statistics of the specified hostname. Syntax: s

C H A P T E R 6 Show Commands145show dns zones <zonename> hostnames <hostname> siteservices <siteservicename>Changes the prompt to

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide146snmp infoDisplays the status of the SNMP-related variables. Infor

C H A P T E R 6 Show Commands147software infoDisplays information regarding installed software. The list of installed software images includes: • Ima

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide148show cli Changes the prompt to the show cli command level.infoDis

SNMP SupportThe SA9200 has a fully compliant, embedded SNMP agent that supports SNMPv1 and SNMPv2c requests. In addition to standard MIB-II, HP privat

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide150HP MIB TreeAll HP enterprise MIBs and MIB objects are defined und

C H A P T E R 7 Supported MIBs151Supported MIBs Management Information Base-II (MIB-II)HP Enterprise MIBs:hpserver-header.myhpmultisite-mib.myWhere t

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide152isvVipPortisvProbeTypeisvProbeStateisvProbePropertiessiteTablesit

C H A P T E R 7 Service Metrics Group153Service Metrics GroupObject DescriptionserviceMetricsTableAn agent runs in a load balancer which communicates

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide10Site Balancing MethodsThe SA9200 supports six site-balancing metho

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide154ISV Metrics GroupObject DescriptionisvTableList of ISV entries. T

C H A P T E R 7 Site Group155Site GroupSNMP TrapsThe following list summarizes the traps generated by the SA9200. For details about a particular trap

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide156isvProbeHttpUrlNormalisvProbeHttpUrlAlertObject DescriptionmsdCon

C H A P T E R 7 Configuring Trap Parameters157Configuring Trap ParametersUse the following CLI commands to display and configure SNMP trap parameters

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide158For example: config sys snmp community create test ip 209.218.240

C H A P T E R 7 Configuring Other SNMP Parameters159Displaying SNMP ParametersNOTE: Ensure that the SA9200’s IP Filtering security mechanism allows

C H A P T E R 7 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide160Notes

Software UpdatesYour SA9200 unit is shipped with the latest system software installed. After initial installation and setup, you may be eligible for,

C H A P T E R 8 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide162Saving Your Current ConfigurationNOTE: Username commands are no

C H A P T E R 8 Rebooting with the New Image and Verifying Installation163Rebooting with the New Image and Verifying InstallationNOTE: If any errors

C H A P T E R 2 Metric Algorithms11method are enterprises that have identified the efficient fulfillment of a specific type or types of traffic as be

C H A P T E R 8 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide164Notes

DiagnosticsThis section describes the available diagnostic information and in-field diagnostics procedures for the SA9200.Diagnostic LEDsThe front pan

A P P E N D I X A HP Multi-Site Traffic Director Server Appliance SA9200 User Guide166Power IndicationThe front panel Power LED connects directly to

A P P E N D I X A Runtime LED Diagnostics167Runtime LED DiagnosticsRuntime ActivityAt runtime, the LEDs provide information about system activity as

A P P E N D I X A HP Multi-Site Traffic Director Server Appliance SA9200 User Guide168System LogThe system log contains diagnostic messages from var

A P P E N D I X A System Log169DNSD: The DNS Server Daemon process This process logs a message when it is started and when reading in the configurat

A P P E N D I X A HP Multi-Site Traffic Director Server Appliance SA9200 User Guide170NCA (Network Configuration Application)This process is in char

A P P E N D I X A System Log171Aug 2 12:13:33 madagascar BACKEND: Reading in configuration...Aug 2 12:13:33 madagascar BACKEND: ***Backend is ready

A P P E N D I X A HP Multi-Site Traffic Director Server Appliance SA9200 User Guide172Notes

Cleaning the Dust FilterThe HP Multi-Site Traffic Director Server Appliance SA9200 has a dust filter element mounted behind the front grille and in fr

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide12allows the user to declare that if Server A is within 2400 connect

APPENDIX B HP Multi-Site Traffic Director Server Appliance SA9200 User Guide174Notes

Regulatory InformationTaiwan Class A EMI Statement

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide176VCCI Statement Class A ITEThis is a Class A product based

A P P E N D I X C Canada Compliance Statement (Industry Canada)177• To the extent possible, relocate the radio, TV, or other receiver away from the p

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide178CISPR 22 StatementWARNING: This is a Class A product. In

A P P E N D I X C WARNING179WARNINGThe system is designed to operate in a typical office environment. Choose a site that is:• Clean and free of airbo

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide180AVERTISSEMENTLe système a été conçu pour fonctionner dans

A P P E N D I X C WARNUNG181WARNUNGDas System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte:•

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide182AVVERTENZAIl sistema è progettato per funzionare in un am

A P P E N D I X C ADVERTENCIAS183ADVERTENCIASEl sistema está diseñado para funcionar en un entorno de trabajo normal. Escoja un lugar:• Limpio y libr

C H A P T E R 2 Partial Failures13Status: OKThis state indicates that the required services behind this service are available on the associated load

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide184Wichtige Sicherheitshinweise1. Bitte lesen Sie sich diese

A P P E N D I X C Wichtige Sicherheitshinweise18515.Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu trennen und von einerqualifizi

A P P E N D I X C HP Multi-Site Traffic Director Server Appliance SA9200 User Guide186Notes

Terms, Conditions and Software License ATTENTION: USE OF THE SOFTWARE IS SUBJECT TO THE HP SOFTWARE LICENSE TERMS SET FORTH BELOW. USING THE SOFTWARE

A P P E N D I X D HP Multi-Site Traffic Director Server Appliance SA9200 User Guide188Copies and Adaptations. You may only make copies or adap

Support ServicesSupport for Your SA9200U.S. and CanadaFor hardware service and telephone support, contact:• An HP-authorized reselleror• HP Customer S

S U P P O R T HP Multi-Site Traffic Director Server Appliance SA9200 User Guide190EuropeFor hardware service and telephone support, contact:• An HP-

S U P P O R T Support for Your SA9200191AsiaFor hardware service and telephone support, contact an HP-authorized reseller or one of these support cen

S U P P O R T HP Multi-Site Traffic Director Server Appliance SA9200 User Guide192Latin AmericaFor hardware service and telephone support, contact a

GlossaryThis section defines terms and acronyms used throughout the HP Multi-Site Traffic Director Server Appliance SA9200 User Guide.Agent Refers to

©Copyright 2001 Hewlett-Packard Company. All rights reserved.Hewlett-Packard Company3000 Hanover StreetPalo Alto, CA 94304-1185Publication Number5971-

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide14Multiple VIP ResponseThe DNS response from a SA9200 may contain mu

G L O S S A R Y HP Multi-Site Traffic Director Server Appliance SA9200 User Guide194Flash Response Mode A solution to DNS site balancing based on ne

G L O S S A R Y HP Multi-Site Traffic Director Server Appliance SA9200 User Guide195Load Balancer HP SA7200, SA7220, SA8200, or SA8220Load Balancing

G L O S S A R Y HP Multi-Site Traffic Director Server Appliance SA9200 User Guide196Aliasing The act of trying to appear as a legitimate packet from

Symbols! 83!! 83* 124, 125? 83@ 124, 125Aadding load balancers 33agents 14associating services 20configuring dns agents 105creating 19, 40al

I N D E X HP Multi-Site Traffic Director Server Appliance SA9200 User Guide198login-attempts 92more 92port 92prompt 92telnet-sessions 93timeout

I N D E X HP Multi-Site Traffic Director Server Appliance SA9200 User Guide199hostnames siteservices 128, 129hostnames siteservices disable 129hos

I N D E X HP Multi-Site Traffic Director Server Appliance SA9200 User Guide200hosts 124ISV groups 114ntp server 96services 116traps 101zones 1

I N D E X HP Multi-Site Traffic Director Server Appliance SA9200 User Guide201Hhelpcommands 85? 70help ttychars 70hostsadding 48, 52creating 21, 2

I N D E X HP Multi-Site Traffic Director Server Appliance SA9200 User Guide202show cli info 82, 148show dns 81show dns agents 81show dns isvgroup

C H A P T E R 2 Definitions15Primary SA9200 is a SA9200 that automatically transfers (copies) configuration information to secondary SA9200s (through

C H A P T E R 2 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide16Notes

CLI ConfigurationCustom/Manual ConfigurationYou can manually change any specific configuration parameters if any of the Quick Start Wizard default set

C H A P T E R 3 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide18Sample Network TopologyAdding a Secondary SA9200Now that the prima

C H A P T E R 3 Custom/Manual Configuration19SA9200. Secondaries get their configuration from their designated primary SA9200 and store a copy of the

C H A P T E R 3 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide20Associating Services with AgentsNext, services must be associated

C H A P T E R 3 Custom/Manual Configuration21HP SA9200/config/dns/zones/somedomain.xyz-ex.com# infoZone: somedomain.xyz-ex.com Authority Records TT

C H A P T E R 3 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide22Committing the ConfigurationThe commit command is used to put the

C H A P T E R 3 Configure DNS Servers23Multiple-VIP ResponseA DNS response may contain multiple answers. A standby VIP is automatically considered as

ContentsChapter 1: Introduction 1 What is an HP Multi-Site Traffic Director Server Appliance SA9200? . . . . . . . . . . . 1 Who Should Use This Boo

C H A P T E R 3 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide24Notes

Multi-Site ScenariosScenario 1One Web site, two geographical sites (one server each), two SA9200s, optional SA7120sIntroductionAn e-commerce company w

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide26changed to Flash Response Mode to deliver the site that has the le

C H A P T E R 4 Scenario 127Step 1. Create the ISV Groups for each site and associate their services.The creation of an ISV Group is primarily for ma

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide28Step 2. Select HTTP probe as the ISV method and associate a URL wi

C H A P T E R 4 Scenario 129HP SA9200/config/dns/zones/geo.mstd-ex.com# infoZone: geo.mstd-ex.com Authority Records TTL: 86400 Authority Name: nswc

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide30HP SA9200/config/dns/zones/geo.mstd-ex.com/hostnames# create wwwH

C H A P T E R 4 Scenario 131Step 7. Configure the Secondary SA9200.Type the IP address of the primary SA9200 (10.1.1.1). HP SA9200# config dns second

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide32Part 2 – Changing to Flash Response Mode BalancingKey Concepts• Fl

C H A P T E R 4 Scenario 133HP SA9200/config/dns# save first-cfgConfiguration savedHP SA9200/config/dns# commit allWarning: Your active configuration

C O N T E N T S HP Multi-Site Traffic Director Server Appliance SA9200 User GuideiiChapter 3: CLI Configuration 17 Custom/Manual Configuration . . .

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide34Step 1. Add the load balancers and their services to the SA9200 co

C H A P T E R 4 Scenario 135If a service is disabled individually, but the agent/ISV Group is left enabled then no referrals are made to that service

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide36Step 2. Map the new services to a hostname.When services are mappe

C H A P T E R 4 Scenario 137HP SA9200/config/dns/zones/geo.mstd-ex.com/hostnames/www# infoHost: wwwMethod: flash TTL: 60 Return Authoritative:

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide38HP SA9200/config/dns/agents# ..HP SA9200/config/dns# isvgroupsHP S

C H A P T E R 4 Scenario 239Scenario 2Multiple sites, server farms, multiple hostnames, multiple SA9200s, generic (not HP) load balancerA large compa

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide40• Flash Response Mode• Mixture of Brokered and Non-brokered Sites•

C H A P T E R 4 Scenario 241• Create Site 1 and associate services:HP SA9200/config/dns/agents# site1HP SA9200/config/dns/agents/site1# flash-src 10.

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide42HP SA9200/config/dns/agents/site1/services# create 10.1.1.102:21Se

C H A P T E R 4 Scenario 243HP SA9200/config/dns/agents# create site2 ip 10.1.2.2Agent site2 createdHP SA9200/config/dns/agents# site2HP SA9200/confi

ContentsiiiObjects and Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Global & CLI System

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide44• Create Backup Site and associate servicesHP SA9200/config/dns/ag

C H A P T E R 4 Scenario 245HP SA9200/config/dns/agents/backupsite/services# create 10.1.2.100:80Service createdHP SA9200/config/dns/agents/backupsit

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide46of failure, so a second SA9200 is located at this site. The second

C H A P T E R 4 Scenario 247HP SA9200/config/dns/isvgroups/site3/services/10.2.3.103:80# method tcpProbe Method set to tcpStep 3. Create the delegate

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide48HP SA9200/config/dns/zones/div2.mstd-ex.com# create-authority ns1.

C H A P T E R 4 Scenario 249In this scenario, the services available on a single Web site have been divided into three different hostnames: www (HTTP

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide50HP_SA9200/config/dns/zones/div1.mstd-ex.com/hostnames/www/siteserv

C H A P T E R 4 Scenario 251HP_SA9200/config/dns/zones/div1.mstd-ex.com/hostnames/wwwsecure/siteservices/backupsite:10.1.4.100:433# standbySite Servi

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide52Step 5. Add host for second zone and map its services.HP SA9200/co

C H A P T E R 4 Scenario 253Are you sure you want to commit the configuration (yes|no) ? yesConfiguration has been committedStep 7. Configure the Sec

C O N T E N T S HP Multi-Site Traffic Director Server Appliance SA9200 User GuideivAppendix D: Terms, Conditions and Software License 187Support Serv

C H A P T E R 4 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide54Notes

Boot MonitorThe SA9200 Boot Monitor Command Line Interface (CLI) allows you to configure boot options and manage boot configuration files. Typically,

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide56• Serial terminal emulation program such as Terminal or HyperTermi

C H A P T E R 5 Accessing the Boot Monitor57Boot Monitor Command ReferenceThe Boot Monitor contains the following commands:Command Descriptionautoboo

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide58bootNOTE: User-entered names and IP addresses in the example are

C H A P T E R 5 Accessing the Boot Monitor59dirDisplays the list of saved boot configuration files. Example:monitor>dirFile name----------- *defau

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide60factory_resetNOTE: factory_reset does not delete saved configurat

C H A P T E R 5 Accessing the Boot Monitor61helpLists all Boot Monitor commands or optionally displays syntax for a specified command. Example: monit

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide62infoDisplays the current boot configuration. Example:monitor>in

C H A P T E R 5 Accessing the Boot Monitor63nicConfigures network interface card (NIC) parameters. Assurance of compatibility with some older switche

IntroductionWhat is an HP Multi-Site Traffic Director Server Appliance SA9200?The HP Multi-Site Traffic Director Server Appliance SA9200 is a global

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide64settimeNOTE: Answer yes is you plan to use Flash Load Balancing.C

C H A P T E R 5 Accessing the Boot Monitor65setupInitiates the setup procedure of the SA9200. The system displays prompts for all inputs necessary to

C H A P T E R 5 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide66Notes

CLI ReferenceThe HP Multi-Site Traffic Director Server Appliance SA9200 is fully configurable through the Command Line Interface (CLI). The CLI is acc

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide68 CTRL-A Move insertion point to beginning of lineCTRL-B Move inser

C H A P T E R 6 Command History69Command HistoryThe SA9200’s CLI records recently executed commands and allows you to review them. history <n>

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide70Pipes Any command can be piped to either grep <grepstring> o

C H A P T E R 6 Command Line Syntax71Command Line SyntaxThis chapter uses the following syntax when referring to CLI commands.Angled brackets (<&g

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide72CLI Command SummaryThis section contains diagrams and lists of the

C H A P T E R 6 Objects and Parameters73 Command Tree (Config)infoROOTconfiginfostatslogprimarysecondarydnsstatsinfocreatedeleterenamehostnamesstats

C H A P T E R 1 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide2• Scalability The SA9200 can work cooperatively with up to fifteen

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide74Global & CLI System Commands? !<n> or h<n>!! … | g

C H A P T E R 6 Objects and Parameters75File Management Commandscat copydir get put removerestore restore-verbosesave Configuration CommandsNOTE: Th

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide76config sys softwareinfo install boot delete config sys secondaryin

C H A P T E R 6 Objects and Parameters77DNS Commandsconfig dnsinfoinfo allstatsstats allstatuslogprimarysecondaryconfig dns agentsinfostatsmetricscre

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide78config dns agents <agentname> servicesinfostatsenabledisable

C H A P T E R 6 Objects and Parameters79config dns isvgroups <isvname> servicesinfostatsenabledisablestandbycreate delete rename config dns isv

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide80config dns zones <zonename> hostnames <hostname>infost

C H A P T E R 6 Objects and Parameters81Show Commandsshow dns infostats info allstats allstatusflash infoshow dns agentsinfostatsmetricsmetrics <i

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide82show dns zones <zonename> infostatsshow dns zones <zonena

C H A P T E R 6 Global & CLI System Commands83Global & CLI System CommandsCommand Description?Displays all the commands at the command level.

C H A P T E R 1 User Guide Summary3User Guide SummaryIn addition to this introduction, the user guide contains the following chapters: • Theory of Op

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide84dbprDisplays information on the active configuration down to the a

C H A P T E R 6 Global & CLI System Commands85dbpr (cont’d) Displays a single VIP- the one associated with host www.foo-ex.com whose IP address i

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide86infoInformation is displayed one page at a time if the file size i

C H A P T E R 6 Global & CLI System Commands87morePauses the screen after displaying a full screen until the <Enter> key is pressed. See th

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide88File Management Commands tracerouteDisplays the route that packets

C H A P T E R 6 File Management Commands89getRetrieves a configuration file from a TFTP server. Because the TFTP protocol has no user-login or valida

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide90restoreRestores a CLI configuration from a previously saved file.

C H A P T E R 6 Configuration Commands91Configuration CommandsConfig CLI CommandsCommand Descriptionconfig cliChanges the prompt level to config cli.

C H A P T E R 6 HP Multi-Site Traffic Director Server Appliance SA9200 User Guide92login-attempts Allows you to specify the maximum allowable number

C H A P T E R 6 Configuration Commands93telnet-sessions NOTE: If you set the number of sessions to 0, you are disabling all future Telnet sessions t