Hp ProLiant MicroServer Manual do Utilizador descarregar pdf (Página 12)

Hardware options installation 12

Removal and replacement tools

In performing any hardware configuration procedures, you might need the following items:

• System screwdriver (secured to the front panel door)

All hardware screws used in the server can be removed or fastened by using the system screwdriver.

• Spare screws, located on the back side of the front panel door.

The following references and software tools might also be used:

• IPMI Event Log

• Diagnostics software

Server warnings and cautions

WARNING: To reduce the risk of personal injury from hot surfaces, allow drives and internal

system components to cool before touching them.

CAUTION:

The server must always be operated with the system covers on. Proper cooling is not

achieved when the system covers are removed.

CAUTION: When installing hardware or performing maintenance procedures requiring access

to internal components, HP recommends that you first back up all server data to avoid loss.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 93 94

Sem comentários

Hp ProLiant MicroServer Manual do Utilizador Página 12