Hp ProLiant ML110 G7 Server Manual do Utilizador descarregar pdf (Página 33)

Hardware options installation 33

Disconnect each power cord from the server.

3. Unlock the tower bezel ("Unlock and open the tower bezel" on page 20).

4. Remove the access panel (on page 21).

5. Remove all installed drives.

6. Disconnect the drive cage cables.

7. Using a T-15 Torx screwdriver, remove the four screws, and then remove the drive cage assembly.

8. Slide the optional drive cage assembly partially into the server chassis.

9. Connect the drive backplane cables:

a. Connect the power cable to the backplane.

b. Connect the I

C cable.

c. Do one of the following:

— Connect the Mini-SAS cable to the system board (SATA drive support only).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 112 113

HP ProLiant ML110 G7 Server 1
User Guide 1
Contents 3
Contents 4 4
Contents 5 5
Contents 6 6
Component identification 7
Rear panel components 8
Rear panel LEDs and buttons 9
System board components 10
DIMM slot locations 11
System maintenance switch 11
System board LEDs 12
NMI functionality 12
SAS and SATA drive numbering 13
SAS and SATA drive LEDs 14
BBWC module LEDs 15
FBWC module LEDs 17
Fan locations 18
Operations 19
Remove the tower bezel 20
Install the tower bezel 20
Remove the access panel 21
Install the access panel 21
Remove the air baffle 22
Install the air baffle 22
Optimum environment 24
Temperature requirements 25
Power requirements 25
Installing hardware options 26
Setting up a tower server 26
Setup 28 28
Registering the server 29
Introduction 30
HP product QuickSpecs 30
SAS and SATA drive options 30
Drive cage options 32
Drive LED cable option 37
Storage controller option 38
Optical drive option 42
Memory options 45
Memory configuration 46
Installing a DIMM 47
Expansion board options 48
RPS enablement option 55
9. Install the RPS cage 57
Cabling 60
Hot-plug, SATA drive support 61
Hot-plug, SAS drive support 61
Eight-bay SFF drive cabling 62
Optical drive cabling 63
Power supply cabling 64
Item Description 65
Configuration and utilities 66
Using RBSU 67
Auto-configuration process 67
Array Configuration Utility 68
• Selecting the boot volume 69
Management tools 70
Diagnostic tools 71
Integrated Management Log 72
Keeping the system current 73
ProLiant Support Packs 74
Firmware 74
HP Smart Update Manager 74
Care Pack 75
Troubleshooting 76
Symbols on equipment 77
Warnings and cautions 77
Symptom information 78
Loose connections 80
Service notifications 81
Server health LEDs 81
Troubleshooting flowcharts 81
General diagnosis flowchart 82
Symptoms: 84
Troubleshooting 86 86
POST problems flowchart 87
OS boot problems flowchart 89
Troubleshooting 90 90
• Redundancy failure 91
(http://www.hp.com/support) 92
Troubleshooting 93 93
Battery replacement 94
Regulatory information 95
Electrostatic discharge 96
Specifications 97
• ATX 350W Power Supply 98
Support and other resources 99
Customer Self Repair 101
Reparo feito pelo cliente 103
Acronyms and abbreviations 107
Documentation feedback 110
Index 111 111
Index 112 112
Index 113 113

Comentários a estes Manuais

Sem comentários

Hp ProLiant ML110 G7 Server Manual do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Hp ProLiant ML110 G7 Server