Hp Traffic Director sa7220 Manual do Utilizador descarregar pdf (Página 227)

C H A P T E R 6 e-Commerce Appliance Scenarios

215

Prerequisites for Scenario 2

NOTE: For each

fulfillment, the server’s

default gateway must be

set to the SA8220’s real

IP address.

• At least one Web server

• One client

• One SA8220 must be physically installed on the network, and its

Boot Monitor and routing protocol configurations must be

complete (please see the “Getting Started Guide”).

Procedure for Scenario 2

Connect to the SA8220

1. Telnet to the SA8220 and log on as the administrator (admin).

The Command Line prompt appears, as shown below:

HP SA8220#

Create a Policy Group

1. To create a policy group, first move the prompt to the policy

group level by typing this command:

HP SA8220#config policygroup

2. To specify the new policy group's name (“saptest” in this

example), type this command:

HP SA8220/config/policygroup#create saptest

policy group saptest created.

3. To move the prompt to that level, type the name of the policy

group just created:

HP SA8220/config/policygroup#saptest

Add Service and VIP

1. To add the SAP service (with a virtual IP address of 30.1.1.201

on port 80) to policy group saptest, type this command:

HP SA8220/config/policygroup/saptest#

service create sap vip 30.1.1.201 port 80

This creates a new service on the SA8220, using the HTTP

protocol, at IP address 30.1.1.201, listening on TCP port 80.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 351 352

Sem comentários

Hp Traffic Director sa7220 Manual do Utilizador Página 227