HP Elite 8300 Series Small Form Factor Especificações Página 213

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 349
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 212
11. Lift up the front of the system board, and then pull the system board forward, up, and out of the
chassis (2).
Figure 8-39 Removing the system board
To install the system board, reverse the removal procedure.
NOTE: When replacing the system board, you must also change the chassis serial number in the
BIOS.
CAUTION: Before reinstalling the heat sink you must clean the top of the processor and the bottom
of the heat sink with an alcohol pad supplied in the spares kit. After the alcohol has evaporated, apply
thermal grease to the top of the processor from the syringe supplied in the spares kit.
CAUTION: When reconnecting the cables it is important that they be positioned so they do not
interfere with the rotation of the drive cage or power supply.
202 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Vista de página 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 348 349

Comentários a estes Manuais

Sem comentários