HP Elite 8300 Series Small Form Factor Especificações descarregar pdf (Página 327)

100

101

B Removing and Replacing a Removable

3.5-inch SATA Hard Drive

Some models are equipped with a Removable SATA Hard Drive Enclosure in the 5.25-inch internal

drive bay. The hard drive is housed in a carrier that can be quickly and easily removed from the drive

bay. To remove and replace a drive in the carrier:

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so

that you can transfer the data to the new hard drive.

1. Unlock the hard drive carrier with the key provided and slide the carrier out of the enclosure.

2. Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2).

Figure B-1 Removing the Carrier Cover

316 Appendix B Removing and Replacing a Removable 3.5-inch SATA Hard Drive

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 348 349

Comentários a estes Manuais

Sem comentários

HP Elite 8300 Series Small Form Factor Especificações Página 327

Comentários a estes Manuais

Manuais e produtos relacionados com Mini-PCs HP Elite 8300 Series Small Form Factor