
Service menu
In the following table, items that have an asterisk (*) indicate the factory default setting.
Menu item Sub-menu item Sub-menu item Description
Fax Service Clear Saved Faxes Clears all faxes in memory.
Run Fax Test Performs a fax test to verify that
the phone cord is plugged in
the correct outlet and that there
is a signal on the phone line. A
fax test report is printed
indicating the results.
Print T.30 Trace Now
Never*
If Error
At End of Call
Prints or schedules a report that
is used to troubleshoot fax
transmission issues.
Error Correction On*
Off
The error correction mode
allows the sending device to
re-transmit data if it detects an
error signal.
Fax Service Log The fax service log prints out
the last 40 entries in the fax
log.
Cleaning Page Cleans the product when
specks or other marks appear
on printed output. The cleaning
process removes dust and
excess toner from the paper
path.
When selected, the product
prompts you to load plain
Letter or A4 paper in Tray 1.
Touch the OK button to begin
the cleaning process. Wait
until the process completes.
Discard the page that prints.
USB Speed High*
Full
Sets the USB speed for the USB
connection to the computer.
For the product to actually
operate at high speed, it must
have high speed enabled and
be connected to an EHCI host
controller that is also operating
at high speed. This menu item
also does not reflect the current
operating speed of the
product.
142 Chapter 6 Solve problems ENWW
Comentários a estes Manuais