HP 100VG Guia do Utilizador descarregar pdf (Página 23)

Mounting a Hub in a Rack or Cabinet

The Hub-14 is designed to be mounted in any EIA-standard 19-inch telco

equipment rack.

Warning The rack or cabinet should be adequately secured to prevent it

from becoming unstable and/or falling over.

1. Using a Phillips (cross-head) screwdriver, attach the mounting brackets

to the hub with the 10-mm M4 screws included in the Accessory Kit. The

top of each bracket should align with the top of the hub. Be careful not

to overtighten the screws.

Note that several different rack mount positions are possible by using the

different holes in the bracket and the hub. The illustration shows the

recommended position for rack mounting to provide the best weight

distribution for the hub.

10-mm M4

screws

Align top of bracket

with top of hub

Installing the

HP AdvanceStack Hub

Installing the HP AdvanceStack Hub

1-9

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 115 116

Sem comentários

HP 100VG Guia do Utilizador Página 23