HP 8800 Router Series Manual de Instalação descarregar pdf (Página 33)

kbd->bi_immr_base = 0xff700000.

Starting kernel at 0x10000 ...

Now beginning to initialize system

User interface con0 is available.

After the router completes booting the applications, the following information appears on the terminal

screen:

Press ENTER to get started.

3. Press Enter to begin configuring the router at the prompt:

<HP>

NOTE:

• The router displays a CLI. For more information about the CLI, see

HP A8800 Routers Fundamentals

Configuration Guide

• The output depends on your router model.

Verifying router operation (recommended)

HP recommends that you verify the following after the router is powered on:

• The cooling system is working. You should be able to hear fan rotation noise and feel air being

blown out.

• All LEDs are functioning correctly.

Table 9 ED status when the router is operating correctly

Part LED Name Status

MPU

MPU status LED

SFC Steady green

ACT

Active MPU: Steady green

Standby MPU: Off

RUN Flashing green

LPU status LED RUN Flashing green

Power

supply

Power supply input/output LED

IN Steady green

OUT Steady green

Fan tray Fan tray status LED

RUN Steady green

ALM Off

For the card LED description, see "LEDs."

Connecting the router to the network

You can connect the router to the network using the following cable types:

• AUX cable

• Ethernet twisted pair

• Optical fiber

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 120 121

Comentários a estes Manuais

Sem comentários

HP 8800 Router Series Manual de Instalação Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP 8800 Router Series