HP Moonshot-45XGc Guia do Utilizador descarregar pdf (Página 83)

Parameters

interface-type interface-number: Specifies an interface by its type and number. If you do not specify an

interface, this command displays the rate limit configuration of all interfaces.

Examples

# Display the rate limit configuration of all interfaces.

<Sysname> display qos lr interface

Interface: FortyGigE1/1/1

Direction: Outbound

CIR 12800 (kbps), CBS 800256 (Bytes)

Interface: FortyGigE1/1/2

Direction: Outbound

CIR 25600 (kbps), CBS 1600000 (Bytes)

Table 30 Command output

Field Descri

tion

Interface Interface type and interface number.

Direction Direction to which the rate limit configuration is applied: inbound or outbound.

CIR CIR in kbps, which specifies the average traffic rate.

CBS CBS in bytes, which specifies the amount of bursty traffic allowed at a time.

qos lr

Use qos lr to limit the rate of packets on an interface.

Use undo qos lr to remove rate limit settings on an interface.

Syntax

qos lr { inbound | outbound } cir committed-information-rate [ cbs committed-burst-size ]

undo qos lr { inbound | outbound }

Default

Rate limit is not configured on an interface.

Views

Layer 2 Ethernet interface view, Layer 3 Ethernet interface view

Predefined user roles

network-admin

Parameters

inbound: Limits the rate of incoming packets on the interface.

outbound: Limits the rate of outgoing packets on the interface.

cir committed-information-rate: Specifies the CIR in kbps. The value range for the

committed-information-rate argument is 8 to 41943040 for 40-GE interfaces, in integral multiples of 8.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 123 124

Sem comentários

HP Moonshot-45XGc Guia do Utilizador Página 83