NGFW Command Line Interface Reference 31
Startup Query Count: 2
General Query Timer Expiry: 00:01:19
Multicast groups joined:
NGFW{}show ipv6 mld groups
MLD Connected Group Membership
Group Address Interface Uptime Expires Last Reporter
ff1e:11::1 ethernet1 00:00:04 00:04:16 fe80::215:17ff:fe3c:edea%ethernet1
show ipv6 mroute
Shows IPv6 routing information for multicast routes.
Syntax
show ipv6 mroute
Example
NGFW{}show ipv6 mroute
Source Group In-interface Out-interface(s)
2001:300::2 ff1e:11::1 pimreg ethernet1
show ipv6 ospfv3
Shows the OSPFv3 unicast routes.
Syntax
show ipv6 ospfv3 (database|interface[IFACE]|neighbor[debug]|route)
Example
NGFW{}show ipv6 ospfv3
OSPFv3 Router with ID (172.16.30.230)
OSPFv3 Routing Process 0 [VRF 0] with Router-ID 172.16.30.230
Running 00:00:07
Graceful Restart: Enabled with interval 120
Status: restarting (left time 113s)
Graceful Restart Helper: Enabled
Redistribute Configuration
Maximum-Prefix is not configured
Number of AS scoped LSAs is 0
Number of AS scoped LSAs is 0
Number of areas in this router is 2
Area 0.0.0.0
Number of Area scoped LSAs is 0
Interface attached to this area: ethernet1
Area 0.0.0.9
Number of Area scoped LSAs is 0
Interface attached to this area:
show ipv6 pim-sm
Protocol Independent Multicast - Sparse Mode (PIM-SM) provides efficient communication between
members of sparsely distributed groups that are common. PIM-SM is designed to limit multicast traffic so
only switches interested in receiving traffic for a particular group receive the traffic
.
Syntax
show ipv6 pim-sm (interface|neighbor|rp|bsr-router)
Comentários a estes Manuais