HP Webcache Filter Series Manual do Utilizador descarregar pdf (Página 109)

COMMAND LINE INTERFACE

The Webcache 1000/3000 has a Command Line Interface that allows you

to manage certain features from a terminal. You may want to use the

Command Line Interface to setup the Webcache for management

through the console port or over your network via Telnet.

This chapter describes how to access and use the Command Line

Interface. It covers the following topics:

■ Accessing the Command Line Interface

■ Logging In To the Command Line Interface

■ Understanding the Command Line Interface

■ A Quick Guide to the Commands

■ Getting Started

■ Displaying and Changing IP-related Information

■ Displaying and Changing Security Information

■ Displaying and Changing Webcache Information and Functions

Accessing the

Command Line

Interface

You can access the Command Line Interface using:

■ A terminal or terminal emulator connected to the console port of the

Webcache directly, or through a modem.

■ A terminal or terminal emulator connected to the Webcache over an

IP network using Telnet. You can do this in two ways:

■ Run a telnet session explicitly to the IP address or Domain Name

System (DNS) name of the Webcache.

■ Select System -> Control -> Telnet in the Web interface. This opens

a telnet session to the Command Line Interface.

You must use a VT52 or VT100/ANSI compatible terminal emulator.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 175 176

Sem comentários

HP Webcache Filter Series Manual do Utilizador Página 109