HP Webcache Filter Series Manual do Utilizador descarregar pdf (Página 31)

The Power-up Sequence 31

7 Slide the rack-mounting brackets on the sides of the Webcache into the

rack-mounting rails.

8 Secure the front of the Webcache to the rack with the captive

thumbscrews, as shown in Figure 8.

Figure 8 Attaching the Webcache to the Rack

9 Ensure that the ventilation holes in the Webcache are not obstructed.

The Power-up

Sequence

The following sections describe how to get your Webcache powered-up

and ready for operation.

Powering-up the

Webcache

Use the following sequence of steps to power-up the Webcache:

1 Plug the power cord into the power socket at the rear of the Webcache.

2 Plug the other end of the power cord into your power outlet.

3 The Webcache automatically powers-up, which takes approximately

60-90 seconds. During power-up all of the LEDs light and the Power/Self

test LED flashes green. When the Webcache has powered-up and is

operating normally, the Power/Self test LED changes to non-flashing

green.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 175 176

Sem comentários

HP Webcache Filter Series Manual do Utilizador Página 31