HP LH4r - NetServer - 256 MB RAM Informações Técnicas descarregar pdf (Página 106)

105

For the latest product & technical information, refer to the Information Sources on pages 2 and 3.

Updated 03/22/01

IBM NETFINITY 7600

13. Netfinity 7600 includes two USB ports, two high-speed serial/asynchronous ports (NS16550A compatible), and one high-speed (up to 2MB/sec. data transfer speed) bidirectional

parallel port supporting devices using ECP/EPP/SSP protocols adhering to the IEEE 1284 standard.

14. Due to homologation variances, modem availability may differ by country.

15. See Appendix E for details on Serial I/O Options and configuration limitations.

16. The Netfinity Advanced Systems Management Processor and Interconnect Bus integrated into Netfinity 7600 works with Netfinity Director to provide significant system management

function. When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309)

additional management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.

17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated

10/100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).

18. Required for all Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN or

modem connection (Netfinity 5500 models 8660-1 ... 4xU are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an

aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.

19.Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter, and a PC Card to 9-pin D-Shell cable

which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring

Connection cannot be connected or used together. To download the latest firmware, access www.pc.ibm.com/us/netfinity. Select “Server Support,” “Family,” “Model,” “Downloadable files,”

and finally “Advanced Systems Management.”

20. A maximum quantity of one is supported.

21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.

22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.

Netfinity 7600 Power, Monitor & Accessories

Part Number Description

Power

33L3760 250W Hot-Swap Redundant Power Supply

Uninterruptible Power Supply (UPS)

94G3135 APC Smart-UPS 1000

94G3136 APC Smart-UPS 1400

94G6674 APC Smart-UPS 1400RMB

94G6676 APC Smart-UPS 3000RMB

37L6861 APC Smart-UPS 5000RMB

Monitors

633347N E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black

6331N2N E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black

6332J1N E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black

66274AN G78 Color Monitor 17in (454mm, 17.9in Viewable Image Size), stealth black

9511AG1 T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black

1. Netfinity 7600 includes three 250W hot-swap redundant power supplies, with the ability to accept one additional 250W

Hot-Swap Redundant Power Supply (P/N 33L3760). Each power supply includes its own 9ft power cord for attachment to

a low voltage UPS, PDU or wall outlet. To assist in determining when an additional power supply is required to preserve

redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 7600. Predicting whether a particular

configuration will require an additional power supply for redundancy is very complex. However, once the system is

installed, the “Non-Redundant LED” will indicate when an additional power supply is required. The following sample

configuration is provided as a reference.

Slot 1- Bus A- 66MHz- 3.3V or Universal

Slot 6- Bus B- 33MHz- 5V or Universal, Active PCI

Slot 2- Bus A- 66MHz- 3.3V or Universal

Slot 5- Bus B- 33MHz- 5V or Universal, Active PCI

Slot 4- Bus B- 33MHz- 5V or Universal, Active PCI

Slot 3- Bus B- 33MHz- 5V or Universal, Active PCI

RAID Adapter

All Slots- Full Length, 64-bit

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 157 158

Comentários a estes Manuais

Sem comentários

HP LH4r - NetServer - 256 MB RAM Informações Técnicas Página 106

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP LH4r - NetServer - 256 MB RAM