HP LH4r - NetServer - 256 MB RAM Informações Técnicas descarregar pdf (Página 96)

For the latest product & technical information, refer to the Information Sources on pages 2 and 3.

Updated 03/22/01

IBM NETFINITY 7100

When used with optional Netfinity Advanced System Management PCI Adapter (P/N 01K7209) and Netfinity Advanced System Management Interconnect Cable Kit (P/N 03K9309) additional

management and control of up to 12 service processors from a remote console through a single modem or LAN connection is possible.

17. Includes PCI adapter, Netfinity Advanced System Management Interconnect Cable Kit components and 56W AC adapter which requires a separate power source. Provides an integrated 10/

100 Ethernet port and PCMCIA slot to support optional Netfinity Advanced System Management Token-Ring Connection (P/N 36L9654).

18. A maximum quantity of one is supported.

19. Required for all xSeries and Netfinity servers containing a standard Advanced System Management Processor that are to be interconnected for system management support through a LAN

or modem connection (Netfinity 5500 models 8660-1 ... 4xU are not supported). Up to 12 service processors may be interconnected (including standard and optional processors) with an

aggregate connection length of no more than 91.4m (300ft). A customer-supplied Ethernet cable is required for each interconnection.

20. Contains an IBM Turbo 16/4 Token-Ring PCI Card, which installs in the PCMCIA card slot of Netfinity Advanced System Management PCI Adapter), and a PC Card to 9-pin D-Shell cable

which is routed to a rear chassis cut-out. The Netfinity Advanced System Management PCI Adapter’s integrated Ethernet port and Netfinity Advanced System Management Token-Ring

Connection cannot be connected or used together. To download the latest firmware, access www.pc.ibm.com/us/netfinity. Select “Server Support,” “Family,” “Model,” “Downloadable files,” and

finally “Advanced Systems Management.”

21. Provides an ESCON MIC and a DB9 Serial Port. Cables are not included but are available through S/390 channels. Contact your IBM representative for additional information.

22. A maximum of two 9086001 adapters (installed in nonadjacent slots) are supported in a single server.

Netfinity 7100 Power, Monitor & Accessories

Part Number Description

Power

33L3760 250W Hot-Swap Redundant Power Supply

Uninterruptible Power Supply (UPS)

94G3135 APC Smart-UPS 1000

94G3136 APC Smart-UPS 1400

94G6674 APC Smart-UPS 1400RMB

94G6676 APC Smart-UPS 3000RMB

37L6861 APC Smart-UPS 5000RMB

Monitors

633347N E51 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black

6331N2N E54 Color Monitor 15in (350mm, 13.8in Viewable Image Size), stealth black

6332J1N E74 Color Monitor 17in (403mm, 15.9in Viewable Image Size), stealth black

66274AN G78 Color Monitor 17in (406.4mm, 16in Viewable Image Size), stealth black

9511AG1 T54A TFT LCD Color Monitor (306mm x 230mm, 15in Viewable), stealth black

1. Netfinity 7100 includes two 250W hot-swap redundant power supplies with the ability to accept up to two additional 250W

Hot-Swap Redundant Power Supplies (P/N 33L3760). Each power supply includes its own 9ft power cord for attachment to a

low voltage UPS, PDU or wall outlet. To assist in determining when an additional power supply is required to preserve

redundancy, a “Non-Redundant LED” is a standard feature of the Netfinity 7100. Predicting whether a particular configuration

will require an additional power supply for redundancy is very complex. However, once the system is installed, the “Non-

Redundant LED” will indicate when an additional power supply is required. The following sample configuration is provided as a

reference.

Slot 1- Bus A- 66MHz- 3.3V or Universal

Slot 6- Bus B- 33MHz- 5V or Universal

Slot 2- Bus A- 66MHz- 3.3V or Universal

Slot 5- Bus B- 33MHz- 5V or Universal

Slot 4- Bus B- 33MHz- 5V or Universal

Slot 3- Bus B- 33MHz- 5V or Universal

All Slots- Full Length, 64-bit

Number of

Power Supplies

System Configuration Supported

Typical Non-Redundant Configuration

2 x Processors

2 3 x PCI Adapters

4 x Half-High or 5 Slim-Line HDDs

8 x 512MB RDIMMs

Typical Redundant Configuration

4 x Processors

6 x PCI Adapters

7 x Half-High or 10 Slim-Line HDDs

16 x 512MB RDIMMs

Full Configuration with Redundancy

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 157 158

Comentários a estes Manuais

Sem comentários

HP LH4r - NetServer - 256 MB RAM Informações Técnicas Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP LH4r - NetServer - 256 MB RAM