HP LH4r - NetServer - 256 MB RAM Informações Técnicas Página 75

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 158
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 74
74
Netfinity 6000R Internal SCSI Cabling
The Netfinity 6000R contains a DASD backplane supporting three hot-swap, SCA-2 compliant drive bays. The backplane is connected to one of the internal
connectors of the integrated dual-channel Ultra160 SCSI controller through a 16-bit LVD SCSI cable. An optional Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit
(P/N 33L5050) can be installed to provide additional internal HDD storage capacity. Within this option are two 16-bit LVD SCSI cables. One can be attached from the
3-Pack Ultra Hot-Swap backplane to the second connector of the dual-channel Ultra160 SCSI controller, the other, through the use of a repeater card included with
the option, can be cabled directly to the standard backplane.
In configurations where external SCSI device attachment is required instead of additional internal HDD storage, a second 16-bit LVD SCSI cable is included with the
server. One end of the cable can be attached to the second Ultra160 connector and the other is attached to the external 0.8mm VHDCI connector on the back of the
chassis. This provides an external connection to support LVDS devices.
218.4GB
(max)
- - 6
2
- - 6
2
- -
This table does not represent all possible HDD configurations.
1. Select a total storage row and then select the quantity of HDDs from a column corresponding to the HDD of choice. Total Internal
Storage listed is within +/- 0.2GB unless otherwise noted.
2. Requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
Bay Form
Factor
Height Front
Access
Usage Part
Number
Description RPM Height Bays
Supported
1
Max
Qty
-
89mm
(3.5in)
SL Yes Diskette
Ultra160 Hard Disk Drives (HDD)
- 133mm (5.25in) HH Ye s
IDE CD-
ROM
37L7201
9.1GB Ultra160 SCSI Hot-Swap SL
HDD
7200 SL 1 ... 6 6
1
1 ... 3 HS SL
1
Ye s O p e n 3 7 L 7 2 02
18.2GB Ultra160 SCSI Hot-Swap
SL HDD
7200 SL 1 ... 6 6
1
4 ... 6
2
HS SL
1
Ye s Open 37L7203
36.4GB Ultra160 SCSI Hot-Swap
SL HDD
7200 SL 1 ... 6 6
1
1. Half-high (HH) devices are NOT supported.
2. To enable Bays 4 ... 6, optional Netfinity 3-Pack Utra160 Hot-Swap
Expansion Kit (P/N 33L5050) is required.
37L7204
9.1GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000 SL 1 ... 6 6
1
37L7205
8.2GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000 SL 1 ... 6 6
1
37L7206
36.4GB 10K-4 Ultra160 SCSI Hot-
Swap SL HDD
10,000 SL 1 ... 6 6
1
19K0655
9.1GB 15Krpm Ultra160 SCSI Hot-
Swap HDD
15000 SL 1 ... 6 6
1
19K0656
18.2GB 15Krpm Ultra160 SCSI
Hot-Swap HDD
15000 SL 1 ... 6 6
1
External Storage
Expansion Units
3
Form Factor
35311RU EXP300 Storage Expansion Unit
4
Rack (3U)
35601RU
FAStT EXP500 Storage Expansion
Unit
5
Rack (3U)
35421RU FAStT200 Storage Server
6, 7
Rack (3U)
35422RU FAStT200 HA Storage Server
6
Rack (3U)
19K1121
FAStT200 Redundant RAID
Controller
-
1. xSeries 350 / Netfinity 6000R ships with bays one to three enabled. To enable installation of greater than three
HDDs requires Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050).
2. Netfinity 3-Pack Ultra160 Hot-Swap Expansion Kit (P/N 33L5050) includes a hot-swap backplane and
associated components for two cabling options. Within the option are two 16-bit LVD SCSI cables. One can be
attached from the 3-pack Ultra160 Hot-Swap backplane to the second connector of the dual-channel Ultra160
SCSI controller, the other, through the use of a repeater card included with the option, can be cabled directly to
the standard backplane. Utilizing the second channel will eliminate the possibility of attaching external devices to
that channel.
3. Not supported by the onboard external SCSI port. To configure a SCSI storage device, select an optional SCSI
controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the
desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit
options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Array
Solutions section.
4. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each
with its own power cord.
5. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each
with its own power cord.
6. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power
cord.
7. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID
Controller (P/N 19K1121).
Diskette
Bay 1
CD-ROM
Bay 2
To enable Bays 4 ... 6, optional Netfinity 3-Pack Ultra160
Hot-Swap Expansion Kit (P/N 33L5050) is required.
Bay 3
Bay 4
Bay 5
Bay 6
Vista de página 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 157 158

Comentários a estes Manuais

Sem comentários