HP rp7440 Especificações Rápidas descarregar pdf (Página 5)

Configuration

The HP 9000 rp8440 Server is a symmetrical multiprocessing (SMP) server supporting up to 16

high performance dual core HP PA RISC PA 8900 (1.068 GHz/64 MB L3 cache). The server is

based on the new and improved sx2000 chip set. The rp8440 can be configured as a single SMP

server or divided into up to four smaller, hardware partitioned (nPars), logical servers.

Cell Boards

A minimum of one and a maximum of four cells can be ordered in HP 9000 rp8440 Servers. Each

cell can be purchased with up to four active PA 8900 processors, or in combination with Instant

Capacity processors.

The HP 9000 rp8440 and HP 9000 rp7440 (8 processor) servers share the same cell board. The

rp8400/rp8420/rx8620 cell boards cannot be carried forward to the rp8440 server.

Note that the rp8440 and rp7440 cell boards can be carried forward to the rx7640 and rx8640

Servers.

Cell Details

4 processor slots (supporting up to eight processor cores with dual core)

HP sx2000 cell controller

16 DDR 2 Memory DIMM slots

DC DC Power converters

Manageability and Processor Dependent Hardware Circuitry

Cell Board

Configuration Rules

Cell boards are ordered individually

Minimum: 1 cell board; Maximum: 4 cell boards

Cell slots 0 or 1 must be loaded first

Recommended Cell board loading order: 0, 1, 2, 3

HP PA RISC PA 8900

Processor Details

1.068 GHz

Level 2 cache: 64 MB

Level 1 cache: .0.75 MB instr + 0.75 MB data per core (3 MB total)

44 bit physical addressing

64 bit virtual addressing

4 GB maximum page size

Processor

Configuration Rules

The HP PA RISC PA 8900 processors have two processors core per processor module.

There must be at least one active processors core (non iCAP) on each active cell board.

Activation of iCAP processors cores can be done one core at a time customers may order

and upgrade the PA 8900 processor in increments of at least one core (in this case the

other core in a processor must be iCAP).

On each cell board, processors must be installed in the following sequence 0, 2, 1, 3

QuickSpecs

HP 9000 rp8440 Server

Configuration

DA - 12697 U.S. QuickSpecs — Version 4 — 3/3/2008

Page 5

1 2 3 4 5 6 7 8 9 10 ... 24 25

QuickSpecs 1

Comentários a estes Manuais

Sem comentários

HP rp7440 Especificações Rápidas Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP rp7440