HP 4400 Informações Técnicas descarregar pdf (Página 14)

8. When prompted, press OK.

The product prints a print cartridge alignment page.

NOTE: If you have colored paper loaded in the input tray when you align the print

cartridges, the alignment will fail. Load unused plain white paper into the input

tray, and then try the alignment again.

9. Load the page print side down on the right front corner of the glass, and then press

OK to scan the page.

10. When the On button stops flashing, the alignment is complete. Remove the alignment

page and recycle or discard it.

Clean the HP All-in-One

To ensure that your copies and scans remain clear, you might need to clean the glass

and lid backing. You might also want to dust the exterior of the HP All-in-One.

TIP: You can purchase an HP Cleaning Kit for Inkjet Printers and All-in-Ones

(Q6260A) that provides everything needed to safely clean your HP device. For more

information, go to:

www.shopping.hp.com/accessories-store/printer.

To clean the glass

1. Turn off the product, unplug the power cord, and raise the lid.

2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive

glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on

the glass, since they can damage it. Do not place or spray liquid directly on the

glass. The liquid might seep under the glass and damage the product.

3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.

4. Turn on the product.

To clean the lid backing

1. Turn off the product, unplug the power cord, and raise the lid.

2. Clean the white document backing with a soft cloth or sponge slightly moistened with

a mild soap and warm water.

Wash the backing gently to loosen debris. Do not scrub the backing.

3. Dry the backing with a dry, soft, lint-free cloth.

CAUTION: Do not use paper-based wipes, as these might scratch the backing.

Chapter 1

12 HP All-in-One overview

HP All-in-One overview

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 22 23

Sem comentários

HP 4400 Informações Técnicas Página 14