HP B109 Manual do Utilizador descarregar pdf (Página 52)

For a copy of the HP Limited Warranty Statement, see the printed documentation that

came with the product.

Print and evaluate a print quality report

Print quality issues can occur for a variety of reasons. You might be using the wrong

software settings or printing a poor quality source file, or there might be a problem with

the printing system in the HP Photosmart. If you are unhappy with the quality of your

prints, you can print a print quality report to help you determine if the printing system is

working properly.

To print a print quality report

1. Load letter or A4 unused plain white paper into the paper tray.

2. Press the top-left, bottom-left, top-left, and top-left buttons in sequence.

The Engineering Menu appears.

3. Press OK to select Manufacturing Menu.

4. Press OK to select reports menu.

5. Press OK to select print-mech tap tests.

6. Press the top-right button until the code displayed changes to 72.

7. Press OK.

The product prints a print quality report that you can use to diagnose print quality

issues.

To evaluate the print quality report

1. Check the ink levels shown on the page. If a cartridge shows very low ink levels and

you find the print quality unacceptable, consider replacing that ink cartridge. Print

quality typically deteriorates as cartridges run out of ink.

NOTE: If the print quality report is not legible, you can check the estimated ink

levels from the control panel or HP Photosmart Software.

Print and evaluate a print quality report 49

Maintain the HP Photosmart

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 118 119

Sem comentários

HP B109 Manual do Utilizador Página 52