HP C30D Manual do Utilizador descarregar pdf (Página 303)

100

101

(109 intentionally excluded)

Diagnostic Tests 5-25

112 Disk Drive Test (Single Loop With Stop on Error)

This test reads data from the drive selected. It checks the seek function, cycle redundancy,

parity, checksum, directory and allocation table integrity, and disk format.

1 Go to: 112

2 Insert a diskette or diskettes in the diskette drive or drives you wish to test.

3 Press: READY to run the test. “0” appears on the display indicating the A: drive.

4 Press: CANCEL to advance to the drive you wish to test.

5 Press: READY to activate the drive.

6 If no errors are found, the test exits automatically.

7 If an error code appears, refer to the Table 2-8, “IGS/Disk Drive Error Codes,” on

page 2-7, to determine which TAG to follow.

8 Press: STOP to exit, if errors are found.

9 To test another drive, repeat this procedure starting with Step 2.

Table 5-27. Disk Drive Test Drive Indications

Display Indication

0 Floppy drive A:

1 Floppy drive B:

2 Hard drive C:

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 482 483

Comentários a estes Manuais

Sem comentários

HP C30D Manual do Utilizador Página 303

Comentários a estes Manuais

Manuais e produtos relacionados com Digitalizar e Imprimir HP C30D