
Expansion Slots
Slot Number
Bus Speed
Bus Number
*
Device
Number
**
Hot Plug
(Y/N)
Notes
1
x16 PCI-Express
6 0
N
Low Profile
2
x8 PCI-Express
5 0
N
Full Length
Full Height
3
x8 PCI-Express
4 0
N
Full Length
Full Height
4
x4 PCI-Express
3 0
N
Full Length
Full Height
2
PCI-X
***
Dynamic
1
N
Full Length
Full Height
3
PCI-X
***
Dynamic
2
N
Full Length
Full Height
NOTE:
All slots can accept universal keyed PCI cards.
NOTE:
Only PCI-X support is available in slot 4, supporting PCI-X cards. PCI legacy cards are not supported.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by
bus (starting with the lowest bus).
*** PCI-X bus speed will be 100MHz in maximum and support two PCI-X/100MHz cards.
**** Slot 2 contains bus 4 and bus 5 because BIOS configures this x16 PCI-express.
NOTE:
Slot to two x8 PCI-express slot for production riser, this is valid only on Option1: 2 PCIe2x8 full-
length/full-height PCI-Express slots (Optional) or Option 4: 2 PCIe2x8 and 1 PCIex8 (4) full-length/full-
height slots (Optional).
Storage Controller
One of the following
depending on Model
4HDD Models
HP Smart Array B110i SATA RAID
NOTE:
To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA
RAID Controller, To enable use of the B110i, enter the ROM based setup
utility(RBSU). The option for enabling RAID can be found in the Advanced
section of the RBSU.
NOTE:
Embedded SATA controller support transfer rate up to 3Gb/s
NOTE:
A diskette drive or virtual FDD using LO100 Advanced Pack is needed to
install storage controller drivers during a Windows operating system
installation from a CD.
NOTE:
HP Smart Array B110i does not support greater than 2TB hard drive.
8HDD Models
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
12HDD Models
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Available upgrades: P410 with FBWC, 256MB with BBWC, 512MB with
FBWC, Battery kit upgrade (for the 256MB cache), and Smart Array Advanced
Pack (SAAP).
NOTE:
Support transfer rate up to 3Gb/s SAS or 3Gb/s SATA
25HDD Models
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE:
Available upgrades: P410, 512MB with FBWC, Battery kit upgrade (for
the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE:
Support transfer rate up to 6Gb/s SAS or 3Gb/s SATA
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
DA - 13248 North America — Version 51 — June 29, 2012
Page 4
Comentários a estes Manuais