HP DL280 Guia do Utilizador descarregar pdf (Página 20)

System BIOS configuration 20

Super IO Configuration submenu

Figure 8 Super IO Configuration submenu

ROM-based Setup Utility

Configure PILOT Super IO Chipset

Allows BIOS to Select

Embedded Serial Port

Embedded Serial Port Address [3F8/IRQ4] Base Addresses.

Serial Port Interrupt setting [Edge trigger]

←→ Select Screen

↑↓ Select Item

+ - Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Table 10

Super IO submenu fields

Field Description Options

Embedded Serial Port

Address

Set this value to prevent the serial port from accessing any system

resources. When this option is set to Disabled, the serial port physically

becomes unavailable.

Disabled

Set this value to allow the serial port to use 2F8 as its I/O port address

and IRQ 3 for the interrupt address. If the system will not use a serial

device, it is best to set this port to Disabled.

2F8/IRQ3

Set this value to allow the serial port to use 3E8 as its I/O port address

and IRQ 4 for the interrupt address. If the system will not use a serial

device, it is best to set this port to Disabled.

3E8/IRQ4

Set this value to allow the serial port to use 2E8 as its I/O port address

and IRQ 3 for the interrupt address. If the system will not use a serial

device, it is best to set this port to Disabled.

2E8/IRQ3

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 49 50

Sem comentários

HP DL280 Guia do Utilizador Página 20