HP DL280 Guia do Utilizador descarregar pdf (Página 5)

System BIOS configuration 5

• When a configuration error is detected by the system and you are prompted by a "Run Setup"

message to make changes to the BIOS settings.

NOTE: If you repeatedly receive “Run Setup” messages, the battery located on the system board

may be defective. In this case, the system cannot retain configuration values in CMOS. Ask a

qualified technician for assistance.

The Setup Utility loads the configuration values in a battery-backed nonvolatile memory called CMOS

RAM. This memory area is not part of the system RAM, which allows configuration data to be

retained when power is turned off. The values take effect when the system is booted. POST uses these

values to configure the hardware. If the values and the actual hardware do not agree, POST

generates an error message. You must run the Setup Utility to change the BIOS settings from the

default or current configuration.

Accessing the Setup Utility

1. Turn on the monitor and the server.

If the server is already turned on, save your data and exit all open applications, and then restart

the server.

During POST, press F10. If you fail to press F10 before POST is completed, you need to restart

the server and repeat this step. The first page displayed is the Main menu. Use the left (←) and

right (→) arrow keys to move between selections on the menu bar.

Navigating through the Setup Utility

Use the keys listed in the legend bar on the bottom of the Setup Utility screen to access the various

menu and submenu screens of the Setup Utility. Table 1 lists these legend keys and their respective

functions.

Table 1 Setup Utility Navigation Keys

Key Function

← and → Select different screens.

↑ and ↓ Select items in each menu.

Enter, Tab, or

Shift-Tab

Select a field value or display a submenu screen.

Display more options for items marked with

Esc Exit the CMOS Setup menu.

<+>, <–> Configure the system time or change field.

F1 To bring up the General Help window.

The General Help window describes other Setup navigation keys that are not displayed

on the legend bar.

F10 To save changes and exit the CMOS Setup Utility.

1 2 3 4 5 6 7 8 9 10 ... 49 50

Sem comentários

HP DL280 Guia do Utilizador Página 5