HP E5000 Guia do Utilizador descarregar pdf (Página 127)

NOTE: Use the drive labels provided with the replacement drive drawer rails to label the

hard drives to ensure you replace the drives in the correct order.

4. Remove all hard drives.

IMPORTANT: Install the hard drives in the same slots from which you removed them or the

system might fail.

5. Push the drive drawer back into the messaging system enclosure.

6. Label each server blade, and then remove both server blades.

7. Label the cables connected to the back of the enclosure so they can be returned to their original

locations.

8. Unplug all cables from the back of the messaging system enclosure.

9. Unscrew the retaining screws from the bezel ears, and then remove the enclosure from the

rack.

WARNING! The messaging system enclosure is heavy, even after removing the hard drives.

Always use at least two people to remove the messaging system from the rack.

10. Remove the top back panel by pressing the panel release button and lifting the latch to slide

the top back off.

11. Extend the hard drive drawer:

1. Press upward on the release button on the hard drive drawer (1).

2. Pull the drawer handle down 90 degrees (2).

3. Extend the hard drive drawer (3).

Removing and replacing the drive drawer rails (side or bottom) 127

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 206 207

Sem comentários

HP E5000 Guia do Utilizador Página 127