HP P6350 Manual do Utilizador descarregar pdf (Página 153)

Figure 75 HP-UX configuration

5. SAN switch 11. Network interconnection

6. SAN switch 22. Single HBA server (Host 1)

7. Controller A3. Dual HBA server (Host 2)

8. Controller B4. Management server

Windows Server 2003 (32-bit) ,Windows Server 2008 (32–bit) , and

Windows Server 2012 (32–bit) configurations

Requirements

• Switch zoning or controller level SSP must be used to ensure each single path HBA has an

exclusive path to its LUNs.

• Single path HBA server can be in the same fabric as servers with multiple HBAs.

• Single path HBA server cannot share LUNs with any other HBAs.

• In the use of snapshots and snapclones, the source virtual disk and all associated snapshots

and snapclones must be presented to the single path hosts that are zoned with the same

controller. In the case of snapclones, after the cloning process has completed and the clone

becomes an ordinary virtual disk, you may present that virtual disk as you would any other

ordinary virtual disk.

HBA configuration

• Host 1 is a single path HBA host.

• Host 2 is a multiple HBA host with multipathing software.

See Figure 76 (page 154).

Risks

• Single path failure will result in loss of connection with the storage system.

• Single path failure may cause the server to reboot.

• Controller shutdown puts controller in a failed state that results in loss of data accessibility

and loss of host data that has not been written to storage.

Windows Server 2003 (32-bit) ,Windows Server 2008 (32–bit) , and Windows Server 2012 (32–bit) configurations 153

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 315 316

Sem comentários

HP P6350 Manual do Utilizador Página 153